S&S X-Wedge 128 c.i.d in a Shelby COBRA scooter
#1
S&S X-Wedge 128 c.i.d in a Shelby COBRA scooter
Oh man ... saw oneof these in person outat Longhorn HD. Not my style of ride ... butthat sure dont meanIwouldnt like to have one in my front room, just for that once ever so often quick ride down to the end of the street or such.
that X Wedge motor ... I like it .. think it looks like a old panhead... the fella I talked to from Ruckers described it as like looking at two of the cylinders from a radial airplane engine.
http://www.ruckerperformance.com/2/b...motorcycle.php
the brochure I got sez...
Builder - Rucker Performance
Year / Model - 2007 / Shelby
Toxic Cherry Bomb Red / Graphite over Snow and Shredded Graphics
Engine - 128 CID S&S X Wedge
Induction and engine management 2-1/16"throttle body with S&S closed loop VFI
Horsepower 160 HP est.
Pimary 3" belt
Clutch - Hydraulic 6 disc
Transmision - Jim's 6 speed
Bore -4.375*
Stroke -4.375*
Shifter - Pingle Electronics
Valve Sizes - 2.0" intake / 1.6" exhaust
Cam Drive - Gates 30mm wide / auto tension
Crank - Forged and Nitrided one peice
Compression ratio - 9.75:1
Brake Roters - Ceramic
300 / 18mm rear metzler 18 x 10.5 carbon fiber mag
120 / 17mm front metzler17 x 3.5 carbon fiber mag
OPTION's -Procharger Supercharger
haha
Production of the "Shelby" will begin in 2007 and will include up to 25 motorcycles that will be available for purchase by the third quarter of this year. Production of a second round of bikes will begin in the fall of 2007.
SB
that X Wedge motor ... I like it .. think it looks like a old panhead... the fella I talked to from Ruckers described it as like looking at two of the cylinders from a radial airplane engine.
http://www.ruckerperformance.com/2/b...motorcycle.php
the brochure I got sez...
Builder - Rucker Performance
Year / Model - 2007 / Shelby
Toxic Cherry Bomb Red / Graphite over Snow and Shredded Graphics
Engine - 128 CID S&S X Wedge
Induction and engine management 2-1/16"throttle body with S&S closed loop VFI
Horsepower 160 HP est.
Pimary 3" belt
Clutch - Hydraulic 6 disc
Transmision - Jim's 6 speed
Bore -4.375*
Stroke -4.375*
Shifter - Pingle Electronics
Valve Sizes - 2.0" intake / 1.6" exhaust
Cam Drive - Gates 30mm wide / auto tension
Crank - Forged and Nitrided one peice
Compression ratio - 9.75:1
Brake Roters - Ceramic
300 / 18mm rear metzler 18 x 10.5 carbon fiber mag
120 / 17mm front metzler17 x 3.5 carbon fiber mag
OPTION's -Procharger Supercharger
haha
Production of the "Shelby" will begin in 2007 and will include up to 25 motorcycles that will be available for purchase by the third quarter of this year. Production of a second round of bikes will begin in the fall of 2007.
SB
#3
RE: S&S X-Wedge 128 c.i.d in a Shelby COBRA scooter
There was a time when that would be my style of bike.Now, with the engines that are available,we can have anything we want.Sleeper Baggersnow floats my boat.
#6
RE: S&S X-Wedge 128 c.i.d in a Shelby COBRA scooter
ORIGINAL: dog155
There was a time when that would be my style of bike.Now, with the engines that are available,we can have anything we want.Sleeper Baggersnow floats my boat.
There was a time when that would be my style of bike.Now, with the engines that are available,we can have anything we want.Sleeper Baggersnow floats my boat.
http://www.ruckerperformance.com/2/b...omod/index.php
my next sled, will more than likely be similar, (hoping) anyway heh
SB
Thread
Thread Starter
Forum
Replies
Last Post
CrBear
Hacked, Conversions and Trailering
15
08-24-2018 07:33 PM
soft 02
General Harley Davidson Chat
3
12-18-2013 06:55 AM