Pics from a ride
#141
The following 6 users liked this post by Gas Smasher:
Big Mule (09-17-2022),
Brian Sparrow (09-16-2022),
CB5150 (12-29-2022),
Ghetto blaster (09-18-2022),
Marsikus (04-24-2023),
and 1 others liked this post.
#142
Hey Gas Smasher cool pic, thanks for keeping this thread alive, currently my bike is in limbo, replacing the 21" up front back to a 16" can't find an Indy that wants to sell, and mount me some tires, so going to attempt to do it myself, and hopefully back to posting up some pics.
Last edited by Ghetto blaster; 09-18-2022 at 05:55 PM.
The following users liked this post:
Gas Smasher (09-20-2022)
#143
Hey Gas Smasher cool pic, thanks for keeping this thread alive, currently my bike is in limbo, replacing the 21" up front back to a 16" can't find an Indy that wants to sell, and mount me some tires, so going to attempt to do it myself, and hopefully back to posting up some pics.
Looking forward to you getting rolling again.
#144
The following 2 users liked this post by Brian15:
Gas Smasher (09-22-2022),
Marsikus (04-24-2023)
#145
If you were closer I'd have you bring the stuff over and we could change them in my shop. I bought a No-Mar changer a couple years back. I am not as enamored with the No-Mar as some people seem to be, but it is decent and is a world better than the Horror Fraught changers or wrestling around with a loose wheel and bars. Keep an eye on Craig's List for one, they show up from time to time. I got a sweet deal on my lift table off Craig's List too. Love the No-Mar or not, mine has paid for itself a couple times over already, so I'll be keeping it.
Looking forward to you getting rolling again.
Looking forward to you getting rolling again.
#146
#147
The following 4 users liked this post by Gas Smasher:
#148
Took her out for the first ride of spring, did some things over the winter, knobby tires, and relocated the oil filter, replaced the oil seal behind the ignition, and basic maintenance, everything looks good so far no oil leaks, and getting close to finding the right tire pressure for the knobby"s, stopped at a location that was supposed to be a factory for a food additive plant, but the project went belly up because the partners had a falling out.
Hope to be posting up some more soon, and hope to see more of you guys pics.
Hope to be posting up some more soon, and hope to see more of you guys pics.
The following 3 users liked this post by Ghetto blaster:
#149
Took her out for the first ride of spring, did some things over the winter, knobby tires, and relocated the oil filter, replaced the oil seal behind the ignition, and basic maintenance, everything looks good so far no oil leaks, and getting close to finding the right tire pressure for the knobby"s, stopped at a location that was supposed to be a factory for a food additive plant, but the project went belly up because the partners had a falling out.
Hope to be posting up some more soon, and hope to see more of you guys pics.
Hope to be posting up some more soon, and hope to see more of you guys pics.
#150