Square panel on the left side, remove the four screws
No need to remove the screws, it's held on with rubber bungs; it pulls straight off. Spray a little foam spray cleaner on the studs before pushing it back on to insure it gets seated all the way.
The starter is turning it over, but I’m not getting any spark. The coil is new, the battery and the switch works on the gas tank. I’m trying it in neutral. I’ve checked the 5 relays for conitnuity. I’m at a loss still!
The starter is turning it over, but I’m not getting any spark. The coil is new, the battery and the switch works on the gas tank. I’m trying it in neutral. I’ve checked the 5 relays for conitnuity. I’m at a loss still!
Check the cam position and crank position sensors according to the service manual.