2016 iron 883 starts but wont run!
#11
The codes are all fuel/air related, map sensor, speed sensor, o2 sensor. They are p0107, p0131, p0151, p0374, p0503, p0506, p0641And pn 001255-01, also b2123, b2271 any suggestions?
#12
#13
My way of thinking is, if it sat for that long not touched, whatever you did since then is the problem, or the cause of it. Putting in new gas into a bad gas environment will mix the good and bad. Then plug up the entries or jets.
My $0.02 of course.
The following users liked this post:
Sorce (05-22-2019)
#14
Sorry. Need to check online. All I have is touring codes. Maybe somebody else can tell you what they mean.
My way of thinking is, if it sat for that long not touched, whatever you did since then is the problem, or the cause of it. Putting in new gas into a bad gas environment will mix the good and bad. Then plug up the entries or jets.
My $0.02 of course.
My way of thinking is, if it sat for that long not touched, whatever you did since then is the problem, or the cause of it. Putting in new gas into a bad gas environment will mix the good and bad. Then plug up the entries or jets.
My $0.02 of course.
#15
My new bike of 3 weeks, died days before the vacation I bought for it. Sensors wire rubbing on fines. I said don't trust a bike until 5k miles, I was at 4.5.
The following users liked this post:
Sorce (05-22-2019)
#17
#18
#19
Yeah I posted some stuff on Facebook in a group and people have just been saying to put some seafoam in it a ride a couple of tanks of gas through it with the seafoam then maybe pull the sensors and clean them if that dosnt work, before taking it to Harley with all these codes.
Search the codes and see what they say. Easy and free. Don't waste money on tries. The codes could give you a direction to go.
#20