Wrenching?
#61
i just don't want to mess up the internals, so I may let the dealer do the cams.
I do Stage 1 stuff 24/7, i had some guys from a club come buy some slips, i had leather gloves & dewalt impact driver, had the slip ons swapped and got paid in like 25 minutes, and they were like DANG!!
bonus parts if you guys can guess what I went shopping for today?
here's a good thread:
https://www.hdforums.com/forum/oil-a...ust-drain.html
Last edited by 04ctd; 05-17-2018 at 08:45 PM.
#62
Join Date: Oct 2017
Location: The mountains of SW Virginia
Posts: 2,441
Received 1,225 Likes
on
706 Posts
A DIY individual is a DIY individual, p/o their DNA! Whether it's building a fence, a storage barn, pouring cement or wrenching - it's what they do! Just a fact! I've known guys that will build a fence that is out of plumb, crooked, uneven, weak and ugly but although acknowledging the fact will spend hours on how they constructed the aforementioned, out of plumb, crooked, weak and ugly fence - they're proud of it? The second fence they build is usually a work of art!
#63
You sound like my daughter now.
The following users liked this post:
Bonnie Storm (05-18-2018)
#64
I ain't no kinda super wrench, but I did grow up poor with grandparents who'd been dirt-poor kids during the Depression & a dad who was scooter trash & a wrench by trade. Watched/fetched tools/helped grandpa keep '37 Plymouth & '52 Chevy dump trucks running & my dad & his buds keep various Ironhead Sporties, Shovels, Pans, Knuckles, etc., even old Yami XS 650s on the road (& often from the side of the road).
Nowadays, I still don't particularly have a lot of money & not a lot of time for that matter. Frequently, if I want something done, I find that I can afford the parts to do something to my bike, but definitely can't afford the labor (even if I had a reputable indy close by, which I'm not convinced of). As an example, I recently put a set of cams in my '02 FXD & was nervous as hell about it, as I'd never been that far inside a Harley engine unsupervised. Also didn't have the $1K or so in labor to have someone else do it. I'm good with my hands, however, have the FSM & a pretty well stocked toolbox, so I rooted around the internet for advice & tips & went for it. Probably took me 10x longer to do it than a pro, but I eventually got it done & couldn't be happier with the results.
I'm not "old school" by any means, nor do I particularly enjoy turning wrenches (making sawdust is my "bag"), but my tightwad, midwestern German DNA will not let me pay someone else to do what I can do for myself. With every bolt I turn, with every pieces/part of my bike that I physically put my hands on, I learn my ride & her inner workings that much better & am that much better prepared to deal with whatever may go wrong with 'er, should something go **** up on me. Plus, I have the satisfaction of knowing I did it myself.
Nowadays, I still don't particularly have a lot of money & not a lot of time for that matter. Frequently, if I want something done, I find that I can afford the parts to do something to my bike, but definitely can't afford the labor (even if I had a reputable indy close by, which I'm not convinced of). As an example, I recently put a set of cams in my '02 FXD & was nervous as hell about it, as I'd never been that far inside a Harley engine unsupervised. Also didn't have the $1K or so in labor to have someone else do it. I'm good with my hands, however, have the FSM & a pretty well stocked toolbox, so I rooted around the internet for advice & tips & went for it. Probably took me 10x longer to do it than a pro, but I eventually got it done & couldn't be happier with the results.
I'm not "old school" by any means, nor do I particularly enjoy turning wrenches (making sawdust is my "bag"), but my tightwad, midwestern German DNA will not let me pay someone else to do what I can do for myself. With every bolt I turn, with every pieces/part of my bike that I physically put my hands on, I learn my ride & her inner workings that much better & am that much better prepared to deal with whatever may go wrong with 'er, should something go **** up on me. Plus, I have the satisfaction of knowing I did it myself.
#65
#66
#67
#69
Join Date: Oct 2015
Location: Pine Flat Dam/South Bay Area, CA
Posts: 11,992
Received 24,349 Likes
on
7,926 Posts
The following 2 users liked this post by Tommy C:
Halojumper (05-21-2018),
TwiZted Biker (05-18-2018)
#70
Same here. I started in the early 70's on a rat pan. I learned quickly how to keep it running, even if just sometimes limping along. In the early 80's I put a shovel top on it and de-ratted it and made it into a fairly decent chopper.