A Day in the Life...
#71
That greenery sure is nuts though. livin in the desert southwest, you forget what plants really look like. would love to take a spin in your neck of the woods
#72
I feel your pain. with crazy work and easter stuff, I havnt ridden in over a week! I plan on takin my baby out tonight after work for a spin though, should have cooled down into the 80's by then
That greenery sure is nuts though. livin in the desert southwest, you forget what plants really look like. would love to take a spin in your neck of the woods
That greenery sure is nuts though. livin in the desert southwest, you forget what plants really look like. would love to take a spin in your neck of the woods
#73
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,730
Received 4,199 Likes
on
2,440 Posts
I feel your pain. with crazy work and easter stuff, I havnt ridden in over a week! I plan on takin my baby out tonight after work for a spin though, should have cooled down into the 80's by then
That greenery sure is nuts though. livin in the desert southwest, you forget what plants really look like. would love to take a spin in your neck of the woods
That greenery sure is nuts though. livin in the desert southwest, you forget what plants really look like. would love to take a spin in your neck of the woods
Yesterday I left work and took the long way home. Hit some roads I had not been on in years.
__________________
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
The following 2 users liked this post by DK Custom:
Almostinvincible119 (05-03-2017),
DanDeleted (02-18-2018)
#74
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,076
Received 4,632 Likes
on
2,735 Posts
I know how that works. The grocery store is about 2 miles away. If there aren't any perishables in the sidecar, it can take me a couple hours to get home. I gave up that work stuff 8 years ago, you should try that someday.
#75
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,730
Received 4,199 Likes
on
2,440 Posts
Just finished prepping a small load to go to Powder Coat today...
...special high heat rubber to keep the powder off the threads.
A lot of work goes into the metal before it's ready for powder....
...and more welding....
...then finishing...
...then tumbling, where it is also coated with a rust inhibitor.
It's been raining all day, instead of going for a ride this afternoon...
Last edited by ChickinOnaChain; 04-27-2017 at 03:23 PM.
#76
I posed a question about rust inhibitor and powder coating, via a PM. Since Kevin took his time and was gracious enough to provide an answer, I thought I'd post the question/answer. Kevin, granted his permission to share the info. I have no affiliation and I've never purchased any of their parts, but a lot of HD Forum members seem to be very happy with their products. I do, however, read their posts, absorb all the technical info that's provided, and I'm certain they're a top shelf company. This is another stroke in the Plus Column, for DK Customs:
Hey xxxx,
I don't mind answering at all..in fact, if you want to post your question and my answer below in the public forum, I think some folks may find it interesting.
We looked at doing our own powder coating, but we work with two local powder coaters that do great work for us, at a price that we could not do it ourselves for.
They are large operations and all the parts are hung on an automated systems that "conveys" the parts thru the entire process. Beginning with cleaning/pre-treatment (which removes the rust inhibitor we apply), all the way thru the baking. Then they are hand-packed for us to be picked up.
The time lag between when we build a part and get it to powder can be as much as 7 days. Then, after we deliver it to them, it can be anywhere from 2-10 days sitting at their shop before it is put on the conveyor.
On average parts will sit a total of 6-7 days between manufacture and powder, and as many as 17 days.
While powder absolutely seals the metal from oxidation, it is better to have none start prior to the prep and powder process.
The cost is a fraction of a penny per part to add the rust inhibitor to the tumbling process, and we do need to tumble as part of the prep anyway.
Thanks for your inquiry, always is good to review processes, looking for improvements.
Ride Free,
Kevin
Ride Free. Absolutely! I hope that parts tumbler, is in a sound-proof room. They're LAF.
Originally Posted by DK Custom
Originally Posted by HarleyScuba
First, I know you're busy, so a simple reply, like, "Because I like it", would be understandable and not taken offensively. However, in a lean manufacturing environment, extra time and materials, add up, quick.
Why do you tumble with a rust inhibitor, if the parts are going to be powder coated? The coater should media blast the components for powder prep, not solely for cleaning and maximizing "tooth" of the metal, but also to minimize any electrical charge (positive or negative) of the substrate. I'm not a Chemist or Metallurgist, but I have a little bit of fabrication and powder coating experience. Mostly, with Aluminum, so I'm a little lacking of knowledge for steel components. I understand an "in-process" rust inhibitor, but aren't you sending the product to the coater, immediately? Wouldn't the rust inhibitor be negated by the blasting/powder/heat process? Doesn't a well-applied and properly cured powder provide a shield from oxidation?
I admire your efforts and appreciate that you take the time to participate in HD Forums, with answers to many riders' questions. So, please, don't take my enquiry as a slam, but as an effort for me to learn and, possibly, save ya'all some dough.
Thank you for your time, and your team's hard work to produce quality products.
xxxx
Why do you tumble with a rust inhibitor, if the parts are going to be powder coated? The coater should media blast the components for powder prep, not solely for cleaning and maximizing "tooth" of the metal, but also to minimize any electrical charge (positive or negative) of the substrate. I'm not a Chemist or Metallurgist, but I have a little bit of fabrication and powder coating experience. Mostly, with Aluminum, so I'm a little lacking of knowledge for steel components. I understand an "in-process" rust inhibitor, but aren't you sending the product to the coater, immediately? Wouldn't the rust inhibitor be negated by the blasting/powder/heat process? Doesn't a well-applied and properly cured powder provide a shield from oxidation?
I admire your efforts and appreciate that you take the time to participate in HD Forums, with answers to many riders' questions. So, please, don't take my enquiry as a slam, but as an effort for me to learn and, possibly, save ya'all some dough.
Thank you for your time, and your team's hard work to produce quality products.
xxxx
Hey xxxx,
I don't mind answering at all..in fact, if you want to post your question and my answer below in the public forum, I think some folks may find it interesting.
We looked at doing our own powder coating, but we work with two local powder coaters that do great work for us, at a price that we could not do it ourselves for.
They are large operations and all the parts are hung on an automated systems that "conveys" the parts thru the entire process. Beginning with cleaning/pre-treatment (which removes the rust inhibitor we apply), all the way thru the baking. Then they are hand-packed for us to be picked up.
The time lag between when we build a part and get it to powder can be as much as 7 days. Then, after we deliver it to them, it can be anywhere from 2-10 days sitting at their shop before it is put on the conveyor.
On average parts will sit a total of 6-7 days between manufacture and powder, and as many as 17 days.
While powder absolutely seals the metal from oxidation, it is better to have none start prior to the prep and powder process.
The cost is a fraction of a penny per part to add the rust inhibitor to the tumbling process, and we do need to tumble as part of the prep anyway.
Thanks for your inquiry, always is good to review processes, looking for improvements.
Ride Free,
Kevin
The following users liked this post:
5wheels (11-06-2018)
#77
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,730
Received 4,199 Likes
on
2,440 Posts
I posed a question about rust inhibitor and powder coating, via a PM. Since Kevin took his time and was gracious enough to provide an answer, I thought I'd post the question/answer. Kevin, granted his permission to share the info. I have no affiliation and I've never purchased any of their parts, but a lot of HD Forum members seem to be very happy with their products. I do, however, read their posts, absorb all the technical info that's provided, and I'm certain they're a top shelf company. This is another stroke in the Plus Column, for DK Customs:
Ride Free. Absolutely! I hope that parts tumbler, is in a sound-proof room. They're LAF.
Ride Free. Absolutely! I hope that parts tumbler, is in a sound-proof room. They're LAF.
It's definitely a loud shop.
When the compressor, tumbler, band-saws, drill press, air finisher, and two welders are going...the stereo is still louder over all of it!
After raining all weekend, the ride in this morning was under a completely cloudless sky....
AND it was 47 degrees!
What's up with that?
It's been in the 80's for the last week or so.
Seems like winter is taking one last breath before it dies down here.
Uneventful & relaxing ride in today. North Mississippi has very little traffic on the roads.
This afternoon Mary and I have an appointment up in Memphis. We'll see more traffic this afternoon than we do in 6 months in Mississippi!
....and there's no lane splitting in Tennessee!
From where we live it is about 8 miles to the closest signal light.
In Red Banks, where I work, there is a 4 way stop, but no signal lights. It is about 7 miles to the closest signal light.
While we have ridden all over North America, including the 405 from San Diego to LA, traffic in NYC and D.C. and 100+ other cities...we prefer the relatively traffic free roads of Mississippi and other rural areas.
Below are a few photos from our ride yesterday into Memphis and back.
On the main artery from where we live...
...up toward suburbia.
Hitting the outskirts of Collierville, a suburb of Memphis
The traffic is not so bad today....
...but there is some stop-n-go on the interstate.
I know tons of folks have it a lot worse, but there is no lane splitting here, and this stuff is a stark contrast to my daily riding...
Back in Mississippi, there are a couple of cars up a ways...
...nothing behind us.
It's nice to live and ride in the "backwards" State of Mississippi.
Last edited by ChickinOnaChain; 05-02-2017 at 02:55 PM.
#79
I'm very fortunate to live in a place where a lot of other H-D owners come to ride. On a nice Saturday, hundreds of them pass the house.
If I turn right, out of my driveway, it's about 40 miles until I come to a stop sign. After 2 miles, the speed limit is 55 and I rarely have anyone behind me.
From today, at a regular resting spot, about 10 miles down the road.
If I turn right, out of my driveway, it's about 40 miles until I come to a stop sign. After 2 miles, the speed limit is 55 and I rarely have anyone behind me.
From today, at a regular resting spot, about 10 miles down the road.
#80
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,730
Received 4,199 Likes
on
2,440 Posts
I'm very fortunate to live in a place where a lot of other H-D owners come to ride. On a nice Saturday, hundreds of them pass the house.
If I turn right, out of my driveway, it's about 40 miles until I come to a stop sign. After 2 miles, the speed limit is 55 and I rarely have anyone behind me.
From today, at a regular resting spot, about 10 miles down the road.
If I turn right, out of my driveway, it's about 40 miles until I come to a stop sign. After 2 miles, the speed limit is 55 and I rarely have anyone behind me.
From today, at a regular resting spot, about 10 miles down the road.
There's some great riding roads in Kentucky! Sounds like you have some ideal riding near you!
Yesterday Devin & I rode to the indoor range at the Pyramid.
I BROKE my Glock! Over 150k rounds thru Glocks over the last 25 years and never had a failure. Didn't even know a Glock Could break.
Trigger spring now on order.
Devin shooting some 000 410 out of a Judge.
Last edited by ChickinOnaChain; 05-02-2017 at 02:53 PM.