Ride On tire application guide
#14
#15
To those asking or wondering about using it with tubes, of course you can and will balance the same. There is a disclaimer on their website that says something about it still being effective with flats but if there is a slash all bets are off. Also the hole size is reduced from 1/4" to 1/8" inch if I am not mistaken. But all of this information is on the site and why I included it in my original post.
#16
Good point but people have to keep in mind the shelf life. I believe 3 years in the bottle and 5 years in tires. I have not looked into it but should also make sure it is the same compound as that for bikes. A person would think so and surely it is on their website but time is not on my side right now.
#17
To those asking or wondering about using it with tubes, of course you can and will balance the same. There is a disclaimer on their website that says something about it still being effective with flats but if there is a slash all bets are off. Also the hole size is reduced from 1/4" to 1/8" inch if I am not mistaken. But all of this information is on the site and why I included it in my original post.
So ultimately no weights, and some puncture resistance.....
Still sounds worth it to me. Could pop off my weights, and I would be no worse off in the puncture department.
Thread
Thread Starter
Forum
Replies
Last Post