Need some help
05-16-2015 | 05:49 PM
Thread Starter
|
Intermediate
Joined: Aug 2008
Posts: 43
Likes: 0
From: Catawissa, Pa
As you can see there's paint on there which rubbed right off with freeking alcohol!<br/>
05-16-2015 | 05:50 PM
Thread Starter
|
Intermediate
Joined: Aug 2008
Posts: 43
Likes: 0
From: Catawissa, Pa
Quote:
Originally Posted by
Iceman24
Same bike (2009 FLHX) and my inner fairing's black "plasic" = no paint. You probably just marred the surface w/the chemical. A pic of this area would help verify...
see pics......
Last edited by teleman001; 05-17-2015 at 06:00 AM .
05-19-2015 | 06:32 AM
Thread Starter
|
Intermediate
Joined: Aug 2008
Posts: 43
Likes: 0
From: Catawissa, Pa
Wow....nobody here have a clue? I thought this was the place for answers to tough questions?
Well I sent a pic and a letter to the mo co. We'll see what they have to say or IF they even respond.
05-19-2015 | 12:28 PM
Joined: Jul 2011
Posts: 453
Likes: 3
From: N. Illinois
+1 on time to paint that inner!
05-20-2015 | 06:31 AM
Thread Starter
|
Intermediate
Joined: Aug 2008
Posts: 43
Likes: 0
From: Catawissa, Pa
Exactly what I want to do but just to touch up this area. Which is why I need to know exactly what paint they used when this was produced.
05-20-2015 | 07:01 AM
Joined: Mar 2014
Posts: 305
Likes: 23
From: Kansas City
Time to repaint inner fairing. I dont think a touchup will look right either
05-20-2015 | 07:13 AM
Joined: May 2010
Posts: 105
Likes: 2
From: Missouri
You can try some stuff called (Back to Black)
I've had good results with it
05-20-2015 | 08:07 PM
Joined: Jul 2011
Posts: 2,824
Likes: 153
From: Street, Md.
Possibly flat black rustoleum. I think the camp black is better. Might be close?
05-21-2015 | 07:16 AM
Joined: Jan 2011
Posts: 421
Likes: 2
From: Dark side of the Moon
I would check out the automotive touchup/trim paint stuff they sell at various large chain stores. It looks an awful lot the plastic trim paint I use on my truck, which is krylon fusion black. Wally world should have something that matches.
http://www.krylon.com/products/fusion-for-plastic/
05-21-2015 | 07:32 AM
Joined: Aug 2013
Posts: 54
Likes: 0
From: allen, tx