07 Heritage Info/Questions
#12
RE: 07 Heritage Info/Questions
Like BILLNOURSE said, Some people claim there is a buzz on the Balanced motors not a vibration. I have had mine at all speeds up to 95 and I can't here it. But above 70 the pipes are singing a awsome tune and I can here that. You will love the bike for around town and trips it's a great bike.And yes I have a Heritage an 06 with a 5 speed, Good luck with the 07 and be safe. Tom
#13
RE: 07 Heritage Info/Questions
There is a little bit of a buzz from the balancer but I would not call it a vibration.
I have an 03 Heritage carbed with a 95 big bore and SE 203 cams and it likes to run in the 65 to 75 mph range. It will go higher if needed but she prefers 14 hours a day at 2800 rpms.
I have an 03 Heritage carbed with a 95 big bore and SE 203 cams and it likes to run in the 65 to 75 mph range. It will go higher if needed but she prefers 14 hours a day at 2800 rpms.
#15
RE: 07 Heritage Info/Questions
same here, it will take your a$$ on down the road!
ORIGINAL: birdie
I have the 07 Heritage Softail and love it, not noticed any problems with vibration.
I have the 07 Heritage Softail and love it, not noticed any problems with vibration.
#16
RE: 07 Heritage Info/Questions
ORIGINAL: AK_Hog_Herder
There is a little bit of a buzz from the balancer but I would not call it a vibration.
I have an 03 Heritage carbed with a 95 big bore and SE 203 cams and it likes to run in the 65 to 75 mph range. It will go higher if needed but she prefers 14 hours a day at 2800 rpms.
There is a little bit of a buzz from the balancer but I would not call it a vibration.
I have an 03 Heritage carbed with a 95 big bore and SE 203 cams and it likes to run in the 65 to 75 mph range. It will go higher if needed but she prefers 14 hours a day at 2800 rpms.
#17
RE: 07 Heritage Info/Questions
No vibration on my '07.
My only regret is not waiting for the burgandy/creme color combinationto come out, but I couldn't wait that long.
My only regret is not waiting for the burgandy/creme color combinationto come out, but I couldn't wait that long.
Thread
Thread Starter
Forum
Replies
Last Post