RT Fairing Build Thread
#11
Join Date: Apr 2010
Location: Long Island, New York
Posts: 8,101
Received 5,445 Likes
on
2,776 Posts
#12
#13
#14
Also I would like to see how you dealt with relocating the wiring in the headlight bucket.
#15
You're on the right track with using the bracket as a template. We have a couple FXR's with the bosses in the shop to use for placement reference. There's a fab shop across the street and we'll roll the bike over to his shop for the welding of the bosses.
The wiring harness is so butchered up from previous owners putting on the T bars and who knows what else, it's a disaster. I'm not sure what we're going to do yet - will have to see if the owner want's some kind of turn signals. I'll post some pics of it as it progresses.
The wiring harness is so butchered up from previous owners putting on the T bars and who knows what else, it's a disaster. I'm not sure what we're going to do yet - will have to see if the owner want's some kind of turn signals. I'll post some pics of it as it progresses.
#16
After having a few other projects take priority we're back on the fairing install. The fabricator made a pair of mounting blocks for the fairing mount and welded them to the neck. Next up, install the mount and fit the fairing. Hopefully you have the threaded bosses on your neck.
Last edited by rizzo; 03-04-2022 at 08:49 PM.
The following users liked this post:
Architect (03-07-2022)
#18
#20