PCIII breaks my starter?
#1
PCIII breaks my starter?
I have posted this on another forum but want any ideas-I bought my PCIII from Fuel moto and 40,000 miles later I still like it. However this is what I heard from HD today.
So I went to HD this morning to have my bearings checked, (wheel) they found the front bad and warranty replaced it.
I mentioned my starter was grinding on occasion and they told me it was my PCIII and the fact I didn't have o2 sensors on the bike. They gave me engine codes of PO134 and PO154 and wouldn't address the starter issue. I may have to get help tweaking PCIII for starting (this only happens now and then, the grinding more often).
My Question, has anybody heard of the PC breaking starters? Sounds like crap to me. They actually suggested I go hook up my o2 sensors with my PC sensors, I think they been smoking something.
A( is there a setting on the PCIII that will help some of these starts
B(has anyone heard of this before
C)anyone familiar with those codes
I was sort of assuming my crap starts when they happen were partly due to the compensator and was thinking of going to the SE compensator
So I went to HD this morning to have my bearings checked, (wheel) they found the front bad and warranty replaced it.
I mentioned my starter was grinding on occasion and they told me it was my PCIII and the fact I didn't have o2 sensors on the bike. They gave me engine codes of PO134 and PO154 and wouldn't address the starter issue. I may have to get help tweaking PCIII for starting (this only happens now and then, the grinding more often).
My Question, has anybody heard of the PC breaking starters? Sounds like crap to me. They actually suggested I go hook up my o2 sensors with my PC sensors, I think they been smoking something.
A( is there a setting on the PCIII that will help some of these starts
B(has anyone heard of this before
C)anyone familiar with those codes
I was sort of assuming my crap starts when they happen were partly due to the compensator and was thinking of going to the SE compensator
Last edited by arnold; 03-07-2010 at 12:14 AM.
#4
#7
First off Harleys have starter problems..thats a fact..Pc3 causing this is Bull.
Call fuel motto for answers to your questions and parts..
Call fuel motto for answers to your questions and parts..
Trending Topics
#8
The PC III is in no way related to your starter problem
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
#10