Frame/Suspension/Front End/Brakes Discussions for your ride comfort and braking power.

Anybody got a Part # for +2 clutch cable needed for WO575's?

Thread Tools
 
Search this Thread
 
  #1  
Old 11-10-2011 | 09:28 AM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Default Anybody got a Part # for +2 clutch cable needed for WO575's?

Picking up a set of WO 575's and need the +2 clutch cable needed for an install on a 2012 SG. If you have the part number on hand I'd appreciate it!
Thanks in advance.
 
  #2  
Old 11-10-2011 | 09:30 AM
DR. V-TWIN's Avatar
DR. V-TWIN
Former Sponsor
Joined: Jan 2009
Posts: 19,364
Likes: 39
From: Los Angeles, CA
Default

Black vinyl? Steel braided? Magnum sterling chromite II?

Drew
 
  #3  
Old 11-10-2011 | 09:53 AM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Default

I was thinking black vinyl but now you've got me thinking I might as well go ahead and add steel braided. Soooo....PN's for +2 steel braided clutch cable and the matching brake line would be super! Thanks!
 
  #4  
Old 11-10-2011 | 09:54 AM
DR. V-TWIN's Avatar
DR. V-TWIN
Former Sponsor
Joined: Jan 2009
Posts: 19,364
Likes: 39
From: Los Angeles, CA
Default

Originally Posted by jl207299
I was thinking black vinyl but now you've got me thinking I might as well go ahead and add steel braided. Soooo....PN's for +2 steel braided clutch cable and the matching brake line would be super! Thanks!
I don't have the part number here at home (it's 6:55 am) but give us a call when we open and we can get one for you.

Drew
 
  #5  
Old 11-10-2011 | 09:55 AM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Default

Do you happen to sell them? If so, anything keeping me away from the local parts dept would be swell.
 
  #6  
Old 11-10-2011 | 09:56 AM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Default

Aparrently my internet is a little slow today, or maybe I'm slow. Will do. Talk to you in a few. Thanks.
 
  #7  
Old 11-10-2011 | 02:36 PM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Default

FYI, just got an email from John at Wild 1 as I was checking up on this before ordering and he said I'd need a +4 for the 575's. I swear a lot of the feedback here was +2 so I just figured I'd throw that out for others to think about and comment on.
 
  #8  
Old 11-10-2011 | 06:14 PM
StreetGeezer's Avatar
StreetGeezer
Tourer
Joined: Oct 2008
Posts: 384
Likes: 1
From: Seffner, Florida
Default

Originally Posted by jl207299
FYI, just got an email from John at Wild 1 as I was checking up on this before ordering and he said I'd need a +4 for the 575's. I swear a lot of the feedback here was +2 so I just figured I'd throw that out for others to think about and comment on.
Trust the guy at Wild 1. I just dropped my 577s for a pair of 575s and kept my +6 clutch cable when I did the swap and had barely any slack left over.
 
  #9  
Old 11-10-2011 | 06:55 PM
jl207299's Avatar
jl207299
Thread Starter
|
Cruiser
Joined: Jan 2011
Posts: 211
Likes: 4
From: NC
Thumbs up

I was super impressed with Wild 1. I had feedback on my questions within minutes of each email. Looking forward to getting the bars and seeing their quality for myself. It might take a minute to get them installed, however. Going to do the bars, all chrome controls, stainless lines, painted inner fairing, exhaust and a/c all at once!
I mean, to get to the clutch cable I figured I'd be taking the exhaust off already to get to the cover so might as well stockpile mods. They do all seem to piggy back on one another.
 
  #10  
Old 11-10-2011 | 07:41 PM
JonW's Avatar
JonW
Road Warrior
Joined: Jun 2011
Posts: 1,387
Likes: 349
From: MO
Default

I've got a +2 and 575s on my SG. Works perfectly.
 



All times are GMT -5. The time now is 06:16 AM.