I have a 93 fatboy with stock rims, I want to put spoke rims off an 02 road king. How hard is it to change from 1" shaft to 3/4" shaft? Is there a kit? Any info will help.

 

HD P/N 9267 is a sealed bearing for a 3/4 in axle The bearings in your 93 are timkin tapered bearings You might be able to use HD bearing P/N 9267 in the new hub if the OD of the bearing is the same as the 1in style (I believe it is ) Jireh cycles sells this bearing P/N 95-802

 

the late model wheel bearing OD are the same - make sure you verify the ID. You may also have to change your axle spacers.
Go to page 665 in the 2010 HD P&A manual. You probably won't need the whole kit; have the parts guys go on line and do a break down.
roll on
-L

 

Thanks for the info, sounds pretty simple, just what I wanted to hear. Thanks again.