I Just had my 64 pan overhauled I now have about 500 miles on it and the front cylinder is blowing white smoke out and the pipe is soaked in gas. can anyone help me

 

Oil leaking around the valve stem because of loose fit or a loose guide and oil leaking around the guide and the press fit in the head.

 

It not burning oil it is white smoke that is raw gas

 

White smoke all the time or just at deceleration.


White smoke when oil is pulled through the guides and blue smoke when oil is pulled past the rings.

Too much fuel and you get black smoke.

Had the same problem with my shovelhead. Builder did not replace worn guides. Had white smoke and oil in the intake manifold and the top of the pistons washed down by oil.

New properly fitted guides installed by a non lying builder and no more white smoke.

 

Are the cylinder head bolts tight??
Scott

 

Are the cylinder head bolts tight??
Scott

Good point, oil return in head could be leaking.