Wimmer TriFlow
#1
Wimmer TriFlow
Hello,
I own an '05 Road King with a 95" build, Screamin' Eagle heads,
SE 258 cams, and Thunderheader 2 into 1. I currently have a
SE air filter cover over a K&N filter. I'm interested in replacing
the filter and cover with a Wimmer TriFlow Stage 2.
Question: Would there be any benefit in this swap? Any noticable
gain in either torque or HP? Currently my scoot produces 107 HP
and 105 Foot Pounds of torque (RC Cycle Dynaflow).
Thanks,
Mike
I own an '05 Road King with a 95" build, Screamin' Eagle heads,
SE 258 cams, and Thunderheader 2 into 1. I currently have a
SE air filter cover over a K&N filter. I'm interested in replacing
the filter and cover with a Wimmer TriFlow Stage 2.
Question: Would there be any benefit in this swap? Any noticable
gain in either torque or HP? Currently my scoot produces 107 HP
and 105 Foot Pounds of torque (RC Cycle Dynaflow).
Thanks,
Mike
#4
The Wimmer Triflow stage 2 doesn't have a decent-sized radius at the mouth of the throttle body. Many other A/C kits do, and it makes a difference in flow. I think your SE backplate has a pretty good radius, so you may be taking a loss in HP and TQ with the Wimmer piece. But I do admit that the TriFlow looks pretty sharp!
Thread
Thread Starter
Forum
Replies
Last Post