Evo exhaust on TC88
#11
10-15-2018 | 08:41 PM
Elite HDF Member
Joined: Jul 2010
Posts: 3,830
Likes: 302
From: Lorain Ohio
#12
10-15-2018 | 08:46 PM
Club Member
Joined: Mar 2012
Posts: 100,442
Likes: 19,806
From: Centennial, CO
it will fit the heads...the question is will it mount up..you may have to make mounting brackets. Touring frames are rubber mounted so the exhaust must be mounted to the engine or trans so it can move with the motor/trans. you may have to space your right foot board out to clear it too.
#13
10-15-2018 | 09:03 PM
the dealer is right. but even if they did fit it would not run right because you have different combustion chamber designs in the heads. bathtub vs d shape. The exhaust ports are different. it would run like crap and you would loose power throughout the power band. get a good exhaust like the vance and hines pro pipe. you eill be glad you did.
Last edited by Ed Ramberger; 10-15-2018 at 09:05 PM.
#15
10-17-2018 | 10:19 AM
Outstanding HDF Member
Joined: May 2014
Posts: 2,400
Likes: 284
From: Fort Worth, TX
Lets give him the benefit of the doubt and assume he now knows that the pipes will interchange...
Thread
Thread Starter
Forum
Replies
Last Post
