Exhaust System Topics New and old exhaust system discussions. Fitment issues to sound bites and suggestions. Post them here.
Sponsored by:
Sponsored by: Jekill and Hyde

RUSH 2.50's popping on decel ?

Thread Tools
 
Search this Thread
 
  #11  
Old 06-15-2007, 06:54 PM
Todd T's Avatar
Todd T
Todd T is offline
Tourer
Join Date: May 2007
Location: Illinois
Posts: 426
Likes: 0
Received 0 Likes on 0 Posts
Default RE: RUSH 2.50's popping on decel ?

can you just drill a new screw hole in the baffles a 1/4" forward of where it is now? otherwise cut them off.
 
  #12  
Old 06-15-2007, 10:03 PM
joelin5386's Avatar
joelin5386
joelin5386 is offline
Tourer
Join Date: Jun 2007
Location:
Posts: 440
Likes: 0
Received 4 Likes on 4 Posts
Default RE: RUSH 2.50's popping on decel ?

Yeah I guess I could do that, also trying to put the 1.75's in I found that the 2.0's had a bar across the front you could pullon to get them out. The 1.75's dont have this. I had to remove the muffler and tap them out from the back. What a bunch of crap. I am going to my local muffler shop to have them cut down, and see if he can weld a bar across these to help get them out again.
 
  #13  
Old 06-16-2007, 12:21 AM
troopin's Avatar
troopin
troopin is offline
Cruiser
Join Date: May 2007
Location:
Posts: 167
Received 18 Likes on 12 Posts
Default RE: RUSH 2.50's popping on decel ?

I would call rush and complain.. they are great about taking care of the customer...will probably send you out new baffles.. they have done that in the past...of course you have to wait a few days but they ship fast for problems...the ones without the bar in the front are the old style.. a lot of people were having troubles with them and they started to put the bar in... call them before you go cutting the baffles if they dont fit i would bet rush will make it right.. and they do not sell to the public so no worries that you bought somewhere else since they wouldnt sell to you directly anyway... call them
 
  #14  
Old 06-16-2007, 02:34 PM
ubreal's Avatar
ubreal
ubreal is offline
Road Master
Join Date: Sep 2006
Posts: 977
Received 184 Likes on 98 Posts
Default RE: RUSH 2.50's popping on decel ?

I had the 1.75 baffles sound great but some popping on decel, bought some 2.25 and I had to modified the hole because they did not fit right but I got them in the popping got worse and lost the bottom end, but on the freeway they ran great but I was not happy so I took them out and put the 1.75 back in and sold the 2.25 on eBay. Still popping on decal. I have gone through 2 PCIIIs and two dyno tune by two deferent tuners this did not take away the popping now I have a SERT and had that dyno tune the popping is still there when I had the PCIII on I add 20% at the 0 column this made the popping less I think that if I kept adding more fuel in this column it would go away.
 
  #15  
Old 06-20-2007, 05:03 PM
joelin5386's Avatar
joelin5386
joelin5386 is offline
Tourer
Join Date: Jun 2007
Location:
Posts: 440
Likes: 0
Received 4 Likes on 4 Posts
Default RE: RUSH 2.50's popping on decel ?

Just got off the phone with Rush. They don't sell to the public, but since eglidegoodies.com didn't seem to want to fix the problem by taking back the old baffles and sending me new ones, Rush stepped up to the plate and is sending some new style baffles to me and didn't even suggest me sending back the old ones. They are fanfreakingtastick in my book.
 
  #16  
Old 06-23-2007, 10:52 PM
JeffSG's Avatar
JeffSG
JeffSG is offline
Road Warrior
Join Date: Oct 2006
Posts: 1,343
Likes: 0
Received 1 Like on 1 Post
Default RE: RUSH 2.50's popping on decel ?

Rush has great customer service.

Peace,
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneP
Exhaust System Topics
0
04-07-2008 05:05 PM
DannyZ71
Sportster Models
2
03-16-2008 07:30 AM
Perko
Exhaust System Topics
4
02-20-2008 01:44 AM
Dyagciog
Touring Models
3
05-31-2007 01:44 AM
BikerDawg
Touring Models
2
05-30-2007 08:52 AM



Quick Reply: RUSH 2.50's popping on decel ?



All times are GMT -5. The time now is 04:55 PM.