Originally Posted by Helomech74

Same filter I had on my Dyna before I installed the Wimmer intake. I think I'll do the same, just use my Zippers Filter that's sitting in the garage and get a backing plate to use it with. I was looking at the RR Cycle intake, I need to call them and see if they will sell the kit minus the filter.

As for the engine build, still up in the air about that. I was looking at doing a 107, but since I've decided to open the bottom end and address the crank, I'm most likely going to go bigger, probably a 117. I've spoke with several shops, but will start to narrow down the choices the closer it gets to winter. I'll do the build myself, just need to decide who's going to do the machine work.

Originally Posted by Helomech74

Well, looks like I have to find a different exhaust. Got in touch with Frank and he said that they don't have the Drago 2 in black and made it sound like they aren't going to offer it. Only other option is buy the chrome setup, strip the chrome and send the heat shields and muffler to Jet Hot to get coated in black.

Originally Posted by target64

wonder whats up with that though they had the process straighten out. but i see a lot of black systems that do fade and look dull after a short time.