Cheap Exhaust Gasket Install Tool
#1
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
While preparing to do a stage 1 on my Ultra I stopped by the local HD to pick up a couple of Exhaust Gaskets. The parts counter man told me I'd also need the Harley Davidson Exhaust Gasket Install tool. I ask if I could see the tool. He went and got one and showed it to me. I said gee that looks just like a flat washer with handle in the center, the counter man agreed. I passed on purchasing one even though they were having a big sale on them. I went home got a big flat washer a long treaded thin toggle bolt and made a Hill Billy exhaust gasket installer tool. Total cost free as I had all the stuff in my junk box. I cleaned the exhaust ports put a little lube on the gaskets, got them started into the exhaust ports, took my tool and tapped the stud with a little brass hammer and low and behold they were installed. I installed a new exhaust system which had be de-catted. All went well with no exhaust leaks. The CFR's sound great. Video will follow when I complete the project. I am attaching a photo of my Hilly Bill tool.
Bill
Bill
#2
#3
#7
Trending Topics
#9
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Just another name for your hands.
One of my dad's favorite sayings when I was screwing with his stuff, "get yer little dick skinners off that".
The term could also be used for a couple gals I dated in high school that had braces. Ouch!
One of my dad's favorite sayings when I was screwing with his stuff, "get yer little dick skinners off that".
The term could also be used for a couple gals I dated in high school that had braces. Ouch!
#10
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
My dad use to say " damn son, shut your jibs"
Jibs. I assume lips. Never heard of a jib anyplace else.