Headlight acting weird
#21
Join Date: Jan 2011
Location: Haslet Texas
Posts: 21,008
Likes: 0
Received 4,361 Likes
on
1,953 Posts
That's the odd thing. Mine would only act up when the bike was first started, too. Never DURING a ride. In any case, it's something to check and costs nothing but a bit of time.
I didn't think it would fix my bike either, for the same reason, but it did. Sometimes logic doesn't seem to apply when hunting electrical gremlins in a Harley.
I didn't think it would fix my bike either, for the same reason, but it did. Sometimes logic doesn't seem to apply when hunting electrical gremlins in a Harley.
I'll give it a try.
Thanks
#24
A couple years ago I had a similar problem. I'd start up the bike, and no headlight. Take it apart and try the bulb-worked perfectly. Put it back together and it would be fine until the next time it acted up.
What fixed mine was removing the contacts from the connector inside the headlamp shell, squeezing the contacts a bit tighter with some pliers, and reinstalling them. Apparently, the contacts weren't making good connection with the tabs on the headlamp all the time. It seemed to happen when I'd first start the bike for some reason.
Since I did this, I've had no more trouble.
What fixed mine was removing the contacts from the connector inside the headlamp shell, squeezing the contacts a bit tighter with some pliers, and reinstalling them. Apparently, the contacts weren't making good connection with the tabs on the headlamp all the time. It seemed to happen when I'd first start the bike for some reason.
Since I did this, I've had no more trouble.
#25
Join Date: Jan 2011
Location: Haslet Texas
Posts: 21,008
Likes: 0
Received 4,361 Likes
on
1,953 Posts
A couple years ago I had a similar problem. I'd start up the bike, and no headlight. Take it apart and try the bulb-worked perfectly. Put it back together and it would be fine until the next time it acted up.
What fixed mine was removing the contacts from the connector inside the headlamp shell, squeezing the contacts a bit tighter with some pliers, and reinstalling them. Apparently, the contacts weren't making good connection with the tabs on the headlamp all the time. It seemed to happen when I'd first start the bike for some reason.
Since I did this, I've had no more trouble.
What fixed mine was removing the contacts from the connector inside the headlamp shell, squeezing the contacts a bit tighter with some pliers, and reinstalling them. Apparently, the contacts weren't making good connection with the tabs on the headlamp all the time. It seemed to happen when I'd first start the bike for some reason.
Since I did this, I've had no more trouble.
Headlight now seems to work fine.
Of course while taking off the headlight it slipped out of my hand and went bouncing across the garage floor.
I wonder if that helped any.
#26
Thread
Thread Starter
Forum
Replies
Last Post