Off to Spanners place for Cam and lifters
12-03-2013 | 06:44 PM
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 972
Likes: 125
From: Hunua Auckland
Off to Spanners place for Cam and lifters
The bike is almost ready to go to Spanners place for the Cam and lifters etc...on Saturday, I sure hope we don't open a can of worms....
12-03-2013 | 06:53 PM
Joined: Sep 2006
Posts: 725
Likes: 1
From: southeast Indiana
indeed
If it happens Kees, I wouldn't be surprised that you'll be well taken care of. Keep us posted!
12-03-2013 | 06:54 PM
Joined: Jan 2011
Posts: 21,008
Likes: 4,362
From: Haslet Texas
12-03-2013 | 06:58 PM
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 972
Likes: 125
From: Hunua Auckland
Originally Posted by
texashillcountry
So what all is etc?
Cam bearing and maybe rings only, nothing spectacular..on a budget.
12-03-2013 | 07:03 PM
Joined: Jan 2011
Posts: 21,008
Likes: 4,362
From: Haslet Texas
Originally Posted by
Kees
Cam bearing and maybe rings only, nothing spectacular..on a budget.
I would cost less in the long run if you did it all while the bike is apart the first time!!!!!!!!!!!!
Come on man go for broke!!!!!!
Pistons, headwork, maybe an open belt primary???????????
The sky is the limit!!!!!!!!!!!!!!!!
12-03-2013 | 07:05 PM
Joined: Sep 2012
Posts: 6,567
Likes: 577
From: almost there
12-03-2013 | 07:06 PM
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 972
Likes: 125
From: Hunua Auckland
Originally Posted by
texashillcountry
I would cost less in the long run if you did it all while the bike is apart the first time!!!!!!!!!!!!
Come on man go for broke!!!!!!
Pistons, headwork, maybe an open belt primary???????????
The sky is the limit!!!!!!!!!!!!!!!!
Yeah...I was in the local HD dealer this morning....they had a 96" S&S motor for US$8800.00 shoulda just bought that !!!
12-03-2013 | 07:07 PM
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 972
Likes: 125
From: Hunua Auckland
Originally Posted by
aces&8s
Which cam ya getting?
V thunder 3000
12-03-2013 | 07:10 PM
Joined: Jan 2011
Posts: 21,008
Likes: 4,362
From: Haslet Texas
Originally Posted by
Kees
Yeah...I was in the local HD dealer this morning....they had a 96" S&S motor for US$8800.00 shoulda just bought that !!!
If your gonna get an S&S 96 is way too small!!!!!!!!!!!!!
Go for the 127" and never look back!!!!!!!!!!
12-03-2013 | 07:14 PM
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 972
Likes: 125
From: Hunua Auckland
Originally Posted by
texashillcountry
If your gonna get an S&S 96 is way too small!!!!!!!!!!!!!
Go for the 127" and never look back!!!!!!!!!!
I was only kidding....that motor cost more than my entire bike...