King Spoke (Fat Spoke) Wheels by Ultima
#171
01-30-2015, 09:18 AM
Tourer
Hey Rich, I may have asked before, but i'm lookin at the pic, and the wheels look great on the bike. Are those the Stock tire sizes and is the bike Lowered at all ?
#172
01-30-2015, 12:31 PM
Yes, they are stock size tires. And I did lower the rear with adjustable Progressive Suspension shocks.
#173
02-18-2015, 03:24 PM
Stage III
Join Date: Feb 2011
Location: McKinney, TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
rear wheel bearings/Ultima King Spoke
Here's my question. I want to run the 16x5.5 rear wheel on a Redneck Engineering softail style frame built to run a 200 rear tire. The axle is 1". Since they only make that wheel for a 3/4" axle, could I change the wheel bearings to ones that will
accept the 1" axle?
accept the 1" axle?
#174
02-18-2015, 09:35 PM
Stellar HDF Member
Here's my question. I want to run the 16x5.5 rear wheel on a Redneck Engineering softail style frame built to run a 200 rear tire. The axle is 1". Since they only make that wheel for a 3/4" axle, could I change the wheel bearings to ones that will
accept the 1" axle?
accept the 1" axle?
#175
03-15-2015, 07:53 PM
Have any of yall with these wheels experienced and alignment issues, I purchased a 21x2.15 (Night Train) front and after I got it all installed and put my new klock werks front wrapper fender the wheel is offset to one side of the fender, so I pulled the fender and set the oem fender on there and it's offset also I pulled the front wheel off and checked the spacers and have the long one on the brake rotor side which is correct I believe. I am at a loss at the moment of what to do I started to sand down the klock werks fender spacers and that hasn't helped
The following users liked this post:
Suprbee (01-06-2018)
#176
03-16-2015, 11:33 AM
Have any of yall with these wheels experienced and alignment issues, I purchased a 21x2.15 (Night Train) front and after I got it all installed and put my new klock werks front wrapper fender the wheel is offset to one side of the fender, so I pulled the fender and set the oem fender on there and it's offset also I pulled the front wheel off and checked the spacers and have the long one on the brake rotor side which is correct I believe. I am at a loss at the moment of what to do I started to sand down the klock werks fender spacers and that hasn't helped
did you use the original spacers? is your rotor lined up with the caliper?
mike
#177
03-16-2015, 01:07 PM
#179
03-23-2015, 02:28 PM
Jireh will always have the lowest price on these wheels. Their contact infomation is: Phone 877-681-0448 Web http://www.jirehcycles.com/
Thanks again to (bikerlaw) for the original thread. I was just about to drop $1k on a set of DNA's. That thread saved me over $500.00
Here's some pics
Thanks again to (bikerlaw) for the original thread. I was just about to drop $1k on a set of DNA's. That thread saved me over $500.00
Here's some pics
#180
03-27-2015, 07:08 AM
Intermediate
Scotty.......the bike looks amazing, very nice. What tires are you running there? I'm getting ready to do the same thing to My '03 Fatboy. My stock tires are Dulop D402F in the front and D401 in the rear, but I don't think I can get the D401 in a WWW so curious as to what your running there?
Thanks
Thanks
Sorry for answering late but I've been absent for a while...
My tires are Dunlop 402F in front and 402 at rear.
Regards
Pierre