Bertha has a small problem
#21
Thanks to all for the help!
And for those of you who assumed it wouldn't work......
#22
You can install a longer collar on the mainshaft to move the front drive pulley out but you will have to shim the pulley on the rear wheel to keep the belt in line...What size rear tire do you have installed?
I need to put a thin spacer between the drive pulley and wheel to keep the belt from rubbing the tire.
My HD shop pissed me off, so I'm thinking of doing the work myself if you guys can give me some guidance.
Is this a big deal? Do you have any tips to make the job easier?
My HD shop pissed me off, so I'm thinking of doing the work myself if you guys can give me some guidance.
Is this a big deal? Do you have any tips to make the job easier?
#23
I installed a 3/16" thick spacer and the problem is gone.
The belt centered itself on the front pulley nicely.
#24
#25
Thanks, but, I thought it was a "torch"..................
By the way, today, She goes back together. I'd cruising down the road later if I had the tank back from the painter!
Plenty of pics http://www.flickr.com/photos/76139453@N03/sets/
Thread
Thread Starter
Forum
Replies
Last Post