Need help on 1990 fltcu tour glide
#11
Are you talking about the CB controls? I have them. In fact I have the entire CB-intercom system minus the mics.
#12
#13
Yes, the CB controls. He has an intermittent loose connection that we traced to the CB control circuit board on the console on the gas tank. That thing is potted up and would be very hard to get to the solder pads on the board. We can talk thru email, PM, or you can post it on Ebay with a Buy It Now, your call.
#14
#15
#16
I Searched for the plate/ mount, on both sites you suggested, but could not find the plate mount. I would like to keep the 2 person seat on there now , and possibly replace the tour pack with a sissy bar /luggage rack. and passenger back rest pad. if you have a link to the proper parts I would appreciate it. Thanks!!!!!
#17
I removed the cruise and original radio, cb and dash controls, replaced clutch and brake switch brackets with standard clamps.
Ended up with about a 20lb box of modules and wires and junk.
Replaced switch housings and added the throttle friction thumbscrew.
I used the old wiring sheaths and wires to make factory looking harnesses for the new radio, speakers, and added power relay (to get full voltage to fairing gauges and accessories).
Ended up with about a 20lb box of modules and wires and junk.
Replaced switch housings and added the throttle friction thumbscrew.
I used the old wiring sheaths and wires to make factory looking harnesses for the new radio, speakers, and added power relay (to get full voltage to fairing gauges and accessories).
Man, that looks great! You relocated the speedo and tach as well, correct? That looks like a lot of work!
#18