New Transmission
#11
Join Date: Sep 2007
Location: Bluffton, South Carolina
Posts: 4,468
Likes: 0
Received 11 Likes
on
11 Posts
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
It sounds like you really know what you are talking about. In your opinion is this something someone with little mechanical experience can do or should I let someone who knows what they are doing repair it?
I have to admit transmissions have always intimidated me.
I have to admit transmissions have always intimidated me.
It isnt that hard to do the drum and forks if you have a manual and a little mechanical expertise. The pawl requires the gearset to be removed to replace it.
#12
#13
Join Date: Dec 2010
Location: Coromandel Peninsula New Zealand
Posts: 7,267
Received 807 Likes
on
436 Posts
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
You can replace all the tranny components without buying any special tools....just make them up. I have a 10 inch 3/4 threaded rod with an assortment of old gear races as spacers and big square washers plus a standard 2-jaw puller.....does me just fine :-) Access to a bench press will help if you don't have a massive vice (other than booze, drugs and broads)
#14
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
It sounds like you really know what you are talking about. In your opinion is this something someone with little mechanical experience can do or should I let someone who knows what they are doing repair it?
I have to admit transmissions have always intimidated me.
I have to admit transmissions have always intimidated me.
Thread
Thread Starter
Forum
Replies
Last Post
mrbrokenbike
Primary/Transmission/Driveline/Clutch
6
04-24-2012 03:06 PM
bensonjv
Primary/Transmission/Driveline/Clutch
11
04-21-2010 08:15 PM