CV carb choke mount
#11
We like to clean up the left side of the bike by moving to the rear of the air cleaner. S&S carbs and others have the choke/enrichner on the right side. All of the Ultima engines have the choke mounted on the right side behind the air cleaner as well.The choke cable is more than long and flexible enough to do this.
#12
I have 1988 FLHT with CV carb. Look at the bracket, maybe You`ll get some ideas.
https://lh4.googleusercontent.com/-z...0/DSCN7716.JPG
https://lh4.googleusercontent.com/-z...0/DSCN7716.JPG
#13
Not an evo, but a shovel with CV. Some of us this type of mount for our enrichener/choke switch. should work on an EVO and provides a tight little package.
http://cid-1bd575cf97afa992.photos.l....frontview.JPG
http://cid-1bd575cf97afa992.photos.l....frontview.JPG
#14
We like to clean up the left side of the bike by moving to the rear of the air cleaner. S&S carbs and others have the choke/enrichner on the right side. All of the Ultima engines have the choke mounted on the right side behind the air cleaner as well.The choke cable is more than long and flexible enough to do this.
#15
Well the mount I have basically attached the enrichener cable to bottom of the CV (a little bracket that attaches to the accelerator pump screws). Works like a champ and does not get in the way of anything, plus no cable to run between the cylinders and no cable to disconnect when you need to pull the carb.
Thread
Thread Starter
Forum
Replies
Last Post
Streetrunner
Touring Models
23
02-21-2013 08:27 AM