Pics of your EVO's
#2001
12-25-2022, 09:13 PM
Road Master
The following users liked this post:
Yankee Dog (12-28-2022)
#2002
12-26-2022, 01:54 AM
The following 8 users liked this post by bert111bel:
Aufklarung (12-26-2022),
bkb5 (04-10-2023),
Celo (12-28-2022),
Mikepawl317 (12-30-2022),
Muskrat21 (12-26-2022),
and 3 others liked this post.
#2003
12-28-2022, 09:51 AM
The following 5 users liked this post by Celo:
Aufklarung (12-28-2022),
Bryan83taco (01-03-2023),
Muskrat21 (12-28-2022),
Schex (01-04-2023),
yellowstone kelly (12-28-2022)
#2004
01-02-2023, 03:22 PM
The following 11 users liked this post by pipeyeti:
adula (03-20-2023),
Aufklarung (01-02-2023),
Aussiemadness (03-12-2023),
Bryan83taco (01-03-2023),
flhchaz (01-03-2023),
and 6 others liked this post.
#2005
01-03-2023, 12:27 PM
The following 2 users liked this post by JDM66:
adula (03-20-2023),
Puppystomper (07-19-2023)
#2006
01-04-2023, 01:47 AM
The following 4 users liked this post by bert111bel:
#2007
01-05-2023, 06:36 AM
Seasoned HDF Member
Join Date: Apr 2010
Location: Long Island, New York
Posts: 8,107
Received 5,459 Likes
on
2,781 Posts
The following 5 users liked this post by Architect:
Aufklarung (01-05-2023),
Paintslinger16 (03-02-2023),
Puppystomper (07-19-2023),
Rains2much (03-20-2023),
Schex (01-06-2023)
#2008
01-05-2023, 07:18 AM
Cruiser
1995 FLSTC that I have had for around 5 years. Was originally completely stock in Teal / Silver but had around 50k on the clock and cosmetically pretty rough.
I bought this with the intention of leaving as was in order to do some 2-up riding with my wife but she wasnt really as keen on the idea as me so I decided to strip it down and turn it into more of a hot-rod that I would enjoy.
I do all my own service work and recently finished a fresh top end rebuild on her with S&S heads, EV27 Cam, hastings rings etc. I had planned on putting everything into a stock dimension 30 degree rigid frame but the roads in Scotland are pretty poor and having previously rode a rigid chop for 10 years, I prefer having a little bit of shock absorption.
I bought this with the intention of leaving as was in order to do some 2-up riding with my wife but she wasnt really as keen on the idea as me so I decided to strip it down and turn it into more of a hot-rod that I would enjoy.
I do all my own service work and recently finished a fresh top end rebuild on her with S&S heads, EV27 Cam, hastings rings etc. I had planned on putting everything into a stock dimension 30 degree rigid frame but the roads in Scotland are pretty poor and having previously rode a rigid chop for 10 years, I prefer having a little bit of shock absorption.
The following 7 users liked this post by Greaser1340:
Architect (01-05-2023),
aspie_keith (03-01-2023),
Bryan83taco (01-08-2023),
flhchaz (01-05-2023),
Puppystomper (07-19-2023),
and 2 others liked this post.
#2009
01-05-2023, 08:18 AM
Seasoned HDF Member
Looking good Bill.. Tell Dagny I say Hello and Happy New Year... I wanted to go out but was getting ready for granddaughters birthday...
The following 3 users liked this post by 98hotrodfatboy:
#2010
01-05-2023, 08:38 AM
Seasoned HDF Member
Join Date: Apr 2010
Location: Long Island, New York
Posts: 8,107
Received 5,459 Likes
on
2,781 Posts
The following users liked this post:
98hotrodfatboy (01-05-2023)