Mikuni carb too much for stock 93 Nostalgia exhaust?
#2
The following 6 users liked this post by misfitJason:
98hotrodfatboy (10-09-2022),
IronAss (10-12-2022),
pgreer (10-09-2022),
Racepres (10-09-2022),
SteddyTeddy (10-17-2022),
and 1 others liked this post.
#3
The following 2 users liked this post by Trumpet:
Racepres (10-09-2022),
SteddyTeddy (10-17-2022)
#4
The Mikuni 42 is a bit big for a stock engine, but if you jet it accordingly it should work fine. It likely will be rich and need slightly smaller jets. Try it first and see how it runs, check the plug colour. Engines are not affected as much by exhaust changes, as compared to intake changes. In many cases just adjusting the mixture screw solves most problems.
The following users liked this post:
SteddyTeddy (10-17-2022)
Thread
Thread Starter
Forum
Replies
Last Post
2012-Peanut
Sportster Models
1
08-21-2012 07:57 AM