I'm at a stand still until I confirm this. I am going off of two different schematics.

Just want to double check my oil line hook ups with you guys. Please confirm or deny

This
Attachment 597338
Goes to this
Attachment 597339

My feed line from the tank
Attachment 597340
Goes to this
Attachment 597341

And this
Attachment 597342
Goes to this
Attachment 597343


My vent shows as this line from the tank to here
Attachment 597344

And this is what S&S is telling me

 

Looks like you got it. The lowest nipple on the tank is the oil feed to the pump. Oil return is the scavenge side of the pump that goes to the oil filter and then the oil filter back to the tank. I have my vent and filter return switched at the tenk compared to the way you have it but I don't think it will make any difference...

 

Looks right, double check that oil is going in around the outside and out through the middle of the filter.

You can look inside the oil tank with a mirror, the vent should be the highest tube.

 

Thank you gentlemen

 

LOL
Only two remarks?

 

Any considerations about riding with passenger during running-in?
For some bikes, i remember, it was not recommended.

 

Oh, somehow posted to wrong topic.

 

On many tanks the return is routed to the opposite side of the tank so the hot oil is not going right back out...

 

I'll have to check mine but I thought ( on mine) the return parallels the vent but it's shorter than the vent..