Motorcycle jack for a 98 dyna
#11
10-26-2018, 10:07 AM
#12
10-26-2018, 10:37 AM
Seasoned HDF Member
#13
10-26-2018, 10:42 AM
Going to google the condor
have both the black/red and the fancy alluminum jacks from sears But not friendly when it comes ti getting a drain pan under the oil filter. But ine learns to make do do
The red and black one’s will jack up the bikes, but wont stay. Unless I drop the stay arms.
Both are very secure when loaded. Enough to remove wheels. So that is saying a lot
Good luck finding a used aluminum sears jack. The red and black no problem finding those for about $50
have both the black/red and the fancy alluminum jacks from sears But not friendly when it comes ti getting a drain pan under the oil filter. But ine learns to make do do
The red and black one’s will jack up the bikes, but wont stay. Unless I drop the stay arms.
Both are very secure when loaded. Enough to remove wheels. So that is saying a lot
Good luck finding a used aluminum sears jack. The red and black no problem finding those for about $50
Last edited by splattttttt; 10-26-2018 at 11:09 AM.
#14
10-26-2018, 11:12 AM
#15
10-26-2018, 12:26 PM
Seasoned HDF Member
Join Date: Apr 2010
Location: Long Island, New York
Posts: 8,082
Received 5,424 Likes
on
2,765 Posts
#16
10-26-2018, 12:27 PM
Seasoned HDF Member
Join Date: Apr 2010
Location: Long Island, New York
Posts: 8,082
Received 5,424 Likes
on
2,765 Posts
As stated, every bike I own from a WL to a Road Glide plus some others helping friends have been up on the jack. Never an issue.
#17
10-26-2018, 01:23 PM
Seasoned HDF Member
I have the HF lift, and bought it 10 years ago. Maybe more. I use it with my FLHT, no problems. I do have to position it under the bike "just right." I've put new seals in the pump a time or two. I also welded an extra stop/dug out an extra notch at just the height where my bike comes fully upright. That way, I pump it to that point and lock it there and it is upright for easy working but still supported by the wheels/tires. I also have the HF $300 table with an added self locking front wheel grabber thingie. The chopper is on it.
#18
10-26-2018, 02:33 PM
Join Date: Jan 2011
Location: Haslet Texas
Posts: 21,008
Likes: 0
Received 4,361 Likes
on
1,953 Posts
I have the HF lift, and bought it 10 years ago. Maybe more. I use it with my FLHT, no problems. I do have to position it under the bike "just right." I've put new seals in the pump a time or two. I also welded an extra stop/dug out an extra notch at just the height where my bike comes fully upright. That way, I pump it to that point and lock it there and it is upright for easy working but still supported by the wheels/tires. I also have the HF $300 table with an added self locking front wheel grabber thingie. The chopper is on it.
#19
10-26-2018, 08:42 PM
#20
10-26-2018, 09:05 PM
Seasoned HDF Member