Wiring LED turning signals
#1
Wiring LED turning signals
I have a 1992 Harley Softail fxsts and was able to wire up a pair of Kuryakn torpedo LED turn signals for the rear of the bike. Worked perfectly. However, now I'm stuck with the fronts. The original turn signals have 3 wires (purple, black, blue) and the Kuryakn torpedos have 2 wires (white and red). I've wired any combination that I can think of, but the I got them working was when all 4 turn signals, headlight and tailight flashed simultaneously? Any help or advice is most appreciated. Thanks.
#2
I have a 1992 Harley Softail fxsts and was able to wire up a pair of Kuryakn torpedo LED turn signals for the rear of the bike. Worked perfectly. However, now I'm stuck with the fronts. The original turn signals have 3 wires (purple, black, blue) and the Kuryakn torpedos have 2 wires (white and red). I've wired any combination that I can think of, but the I got them working was when all 4 turn signals, headlight and tailight flashed simultaneously? Any help or advice is most appreciated. Thanks.
Something like this:
Thread
Thread Starter
Forum
Replies
Last Post
huskytamer
Ignition/Tuner/ECM/Fuel Injection
1
05-09-2012 02:30 PM