Looks ok. You don't want to idle a motor that low.. it's not good for the crank pin... And if you noticed every time he went to throttle it up he had to feather the throttle.... And just so you know it's in the cam.... And not the carburator.....
Also If you know this guy tell him to tighten up the rear pipe, it's quite loose.....
Looks ok. You don't want to idle a motor that low.. it's not good for the crank pin... And if you noticed every time he went to throttle it up he had to feather the throttle.... And just so you know it's in the cam.... And not the carburator.....
Also If you know this guy tell him to tighten up the rear pipe, it's quite loose.....
To heck with the crank pin and the oil pressure, in normal riding the engine doesn't spend that much time at idle and I would kill for that sound. It's an 80 cubic inch with 10.5:1 heads (ported and polished) Super "E" carb and an S&S 561 cam. In the comments under the video he said he tightened the pipe.
Question: I have a 2000 sport 883/1200 with #25648-91 se cams and se slipons, lollypop baffles, nice diy A/C, 6800 RPM Ing. module and it sounds pretty good but not like I would like. Got any suggestions besides, if it ain't broke don't fix it
PS: it has the stock 883 pulley's and will do 80 in 3rd gear like a scalded dog!
What exhaust and cleaner do you have? If you have a little blurb blurb once in a while at idle get a 45 idle jet .
Samson slip-ons and a mesh bug eye air cleaner. While I am waiting for the new main jets to arrive, I put the 46 idle jet in and took a ride. I think I found the sweet spot. It ran like its old self again only better, thanks to the new carb.
Samson slip-ons and a mesh bug eye air cleaner. While I am waiting for the new main jets to arrive, I put the 46 idle jet in and took a ride. I think I found the sweet spot. It ran like its old self again only better, thanks to the new carb.
Great, that velocity needle is gona work for you also.