Strange turn signal problem
#41
What's the actual voltage across the battery when the turn signals are not working? Is there any AC component to the charging system? That is, put your DVM on "AC" and measure across the battery. Next, with the meter back at DC volts, put red jammed in the back of the plug for pin 1 on that box and black at the battery negative. Read any voltage at idle (working)? Read any revved up (not working?)
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
#42
What's the actual voltage across the battery when the turn signals are not working? Is there any AC component to the charging system? That is, put your DVM on "AC" and measure across the battery. Next, with the meter back at DC volts, put red jammed in the back of the plug for pin 1 on that box and black at the battery negative. Read any voltage at idle (working)? Read any revved up (not working?)
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
Something inducing voltage to the ckt???
WP
#44
What's the actual voltage across the battery when the turn signals are not working? Is there any AC component to the charging system? That is, put your DVM on "AC" and measure across the battery. Next, with the meter back at DC volts, put red jammed in the back of the plug for pin 1 on that box and black at the battery negative. Read any voltage at idle (working)? Read any revved up (not working?)
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
Last resort: Doesn't Texas not require turn signals? Take the damn things off. Done.
I will figure this thing out even if I have to replace the entire wiring harness!!!
#45
#47
PROGRESS!!!!
While messing with the connector on the TSM I found that touching the wires under the ignition switch messed with the turn signals!!!!
I played with the wires some more and now the problem occurs all the time.
The turn signals are now putting out dot dot dash repeating with the bike off.
While messing with the connector on the TSM I found that touching the wires under the ignition switch messed with the turn signals!!!!
I played with the wires some more and now the problem occurs all the time.
The turn signals are now putting out dot dot dash repeating with the bike off.
#48