Cam swap parts list
#14
04-20-2016 | 02:04 PM
Club Member
Joined: Aug 2008
Posts: 22,165
Likes: 15,880
From: Lafayette, Louisiana
Here is my parts list. I went with fresh rings since the cylinders had minor scarring.
Andrews EV-13 cam $119.95
Dynojet Thunderslide with Jet Kit 8708 $128.42
Crane Cams Time Saver Adjustable Push Rods 4-0030 $126.72
Dynatek 2000P DD2000-HD2EP ignition module $145
Crane Cams big axle lifters 3-2050. set of four for $189.95
Crane Cams cam bearing 7-0400 $15.51
Cometic Cam Gasket Service Kit C9624F $19.04
Cometic EST Top End Gasket Kit w/.030" Head $87.39
Screaming Eagle Air Cleaner Kit (Carbureted Evo) 295433-99B $127.96
New set of stock rings
Milled Heads .025"
Andrews EV-13 cam $119.95
Dynojet Thunderslide with Jet Kit 8708 $128.42
Crane Cams Time Saver Adjustable Push Rods 4-0030 $126.72
Dynatek 2000P DD2000-HD2EP ignition module $145
Crane Cams big axle lifters 3-2050. set of four for $189.95
Crane Cams cam bearing 7-0400 $15.51
Cometic Cam Gasket Service Kit C9624F $19.04
Cometic EST Top End Gasket Kit w/.030" Head $87.39
Screaming Eagle Air Cleaner Kit (Carbureted Evo) 295433-99B $127.96
New set of stock rings
Milled Heads .025"
#15
04-21-2016 | 04:05 AM
Seasoned HDF Member
Joined: Dec 2010
Posts: 7,308
Likes: 867
From: Coromandel Peninsula New Zealand
You can if you want but it's a wasted $100 IMO.
I had some adjustables in my bike and the damn lock nut came loose.
I pulled them back out and reinstalled solids when I rebuilt my motor.
Unless you are going with a radical cam there is no need for adjustables.
BTW I think you would like an EV 13 better in that big of a bike.
It's got more torque at the low end to get all that mass moving.
I had some adjustables in my bike and the damn lock nut came loose.
I pulled them back out and reinstalled solids when I rebuilt my motor.
Unless you are going with a radical cam there is no need for adjustables.
BTW I think you would like an EV 13 better in that big of a bike.
It's got more torque at the low end to get all that mass moving.
Listen to this man....it will save me going on a rant about adjustable pushrods...
#17
04-21-2016 | 01:34 PM
Seasoned HDF Member
Joined: Apr 2011
Posts: 5,872
Likes: 1,889
From: W. Texas
#18
04-21-2016 | 01:40 PM
Road Master
Joined: Sep 2013
Posts: 883
Likes: 264
From: Tejas
#19
04-21-2016 | 07:09 PM
Outstanding HDF Member
Joined: Jan 2013
Posts: 2,743
Likes: 416
From: Vermont
Thread
Thread Starter
Forum
Replies
Last Post
Bikerscum
2014-2023 Touring Models
4
06-07-2015 09:53 PM