Harley Davidson Forums

Engine Mechanical Topics Discussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.

Kit stage III (29893-07B) with cnc ported heads

Thread Tools
 
Search this Thread
 
  #21  
Old 07-10-2020, 12:38 PM
djl's Avatar
djl
djl is offline
HDF Community Team

Join Date: Jun 2006
Location: san antonio
Posts: 12,242
Received 2,221 Likes on 1,607 Posts
Default
Originally Posted by MARCOS BERMUDEZ JORGE
Hello DJL.
finally Im going to install in the 103 kit the se forged piston high compression kit (10.5:1) with the se 585 cams. Also install the ACRs .
I have a doubt with the pushrods, i can use the stock ones also right? Because in the catalog se, says use 18400-03 with cnc ported heads ( its the stock Size) i buy the highlift jhonson b2313se lifters

whats your opinion to use this cam in a dyna? It will be dificult to tune with the sept? thanks!
Now I am confused. Your original post said you purchased the 28893-07B kit and the CNC ported heads which have stock 85cc chambers. That kit comes with SE255 cams and flat top pistons. I don't know what you are doing now but do know that you should not be installing high compression 10.5:1 pistons with CNC heads and SE585 cams; compression will be too high.
 
Reply Like
  #22  
Old 07-10-2020, 12:51 PM
MARCOS BERMUDEZ JORGE's Avatar
MARCOS BERMUDEZ JORGE
MARCOS BERMUDEZ JORGE is offline
Intermediate
Thread Starter
Join Date: Dec 2019
Location: spain
Posts: 29
Received 4 Likes on 4 Posts
Default
Originally Posted by djl
Now I am confused. Your original post said you purchased the 28893-07B kit and the CNC ported heads which have stock 85cc chambers. That kit comes with SE255 cams and flat top pistons. I don't know what you are doing now but do know that you should not be installing high compression 10.5:1 pistons with CNC heads and SE585 cams; compression will be too high.
Yes I buy the kit and the CNC heads. It just that I was thinking If It possible to make It as the 92500023A kit ( changing pistons and cams)
so its better option the first idea right?
Thanks
 
Reply Like
  #23  
Old 07-10-2020, 02:15 PM
djl's Avatar
djl
djl is offline
HDF Community Team

Join Date: Jun 2006
Location: san antonio
Posts: 12,242
Received 2,221 Likes on 1,607 Posts
Default
Originally Posted by MARCOS BERMUDEZ JORGE
Yes I buy the kit and the CNC heads. It just that I was thinking If It possible to make It as the 92500023A kit ( changing pistons and cams)
so its better option the first idea right?Thanks
No. Install the kit as it comes with the flat top pistons, .045" head gasket and the CNC ported heads along with the compression releases; you will need them. The 32109-08B tuner you have has the "smart tune" feature so you can download a baseline tune from the available options, just find the one for this kit or the one closes to it then "smart tune" from there. If you don't have the manual, you can probably find one online.
 
Reply Like
  #24  
Old 07-10-2020, 02:27 PM
MARCOS BERMUDEZ JORGE's Avatar
MARCOS BERMUDEZ JORGE
MARCOS BERMUDEZ JORGE is offline
Intermediate
Thread Starter
Join Date: Dec 2019
Location: spain
Posts: 29
Received 4 Likes on 4 Posts
Default
Originally Posted by djl
No. Install the kit as it comes with the flat top pistons, .045" head gasket and the CNC ported heads along with the compression releases; you will need them. The 32109-08B tuner you have has the "smart tune" feature so you can download a baseline tune from the available options, just find the one for this kit or the one closes to it then "smart tune" from there. If you don't have the manual, you can probably find one online.
Thanks for the advice! I Will do that.
wich numbers of hp and Torque i can have with mu kit?
The highlift Johnson b2313se Will work good in the kit?
Thanks for your help
 
Reply Like
  #25  
Old 07-10-2020, 03:19 PM
djl's Avatar
djl
djl is offline
HDF Community Team

Join Date: Jun 2006
Location: san antonio
Posts: 12,242
Received 2,221 Likes on 1,607 Posts
Default
Originally Posted by MARCOS BERMUDEZ JORGE
Thanks for the advice! I Will do that. wich numbers of hp and Torque i can have with mu kit? The highlift Johnson b2313se Will work good in the kit? Thanks for your help
The lifters will work fine. TQ/HP will depend on tune. The SE255 is a TQ cam so you could see 110TQ/90HP. Good luck.
 
Reply Like
  #26  
Old 07-10-2020, 04:50 PM
MARCOS BERMUDEZ JORGE's Avatar
MARCOS BERMUDEZ JORGE
MARCOS BERMUDEZ JORGE is offline
Intermediate
Thread Starter
Join Date: Dec 2019
Location: spain
Posts: 29
Received 4 Likes on 4 Posts
Default
Originally Posted by djl
The lifters will work fine. TQ/HP will depend on tune. The SE255 is a TQ cam so you could see 110TQ/90HP. Good luck.
Thanks whats your opinion from pistón kit 22942-00A.
Regards
 
Reply Like
  #27  
Old 07-10-2020, 05:09 PM
djl's Avatar
djl
djl is offline
HDF Community Team

Join Date: Jun 2006
Location: san antonio
Posts: 12,242
Received 2,221 Likes on 1,607 Posts
Default
Originally Posted by MARCOS BERMUDEZ JORGE
Thanks whats your opinion from pistón kit 22942-00A.Regards
Those are same pistons as in the 29893-07B kit I think. 22942-00A are 3.875" but forged; not sure if the pistons in the kit are forged or cast but piston size is the same. Use the pistons in the kit.
 
Reply Like
  #28  
Old 07-10-2020, 05:37 PM
MARCOS BERMUDEZ JORGE's Avatar
MARCOS BERMUDEZ JORGE
MARCOS BERMUDEZ JORGE is offline
Intermediate
Thread Starter
Join Date: Dec 2019
Location: spain
Posts: 29
Received 4 Likes on 4 Posts
Default
Originally Posted by djl
Those are same pistons as in the 29893-07B kit I think. 22942-00A are 3.875" but forged; not sure if the pistons in the kit are forged or cast but piston size is the same. Use the pistons in the kit.
thanks forged Will be better than the Cast in this case?
​​
 
Last edited by MARCOS BERMUDEZ JORGE; 07-10-2020 at 05:48 PM.
Reply Like
  #29  
Old 07-10-2020, 05:58 PM
eighteight's Avatar
eighteight
eighteight is offline
Seasoned HDF Member
Join Date: Oct 2019
Location: OH
Posts: 7,880
Received 4,976 Likes on 2,859 Posts
Default
[QUOTE=MARCOS BERMUDEZ JORGE;19253106]Thanks for the advice! I Will do that.
wich numbers of hp and Torque i can have QUOTE]

Please follow the good advice here, commit to a plan and go forward
you cant ride a dyno sheet
 
Last edited by eighteight; 07-10-2020 at 06:00 PM.
Reply Like
  #30  
Old 07-10-2020, 06:57 PM
MARCOS BERMUDEZ JORGE's Avatar
MARCOS BERMUDEZ JORGE
MARCOS BERMUDEZ JORGE is offline
Intermediate
Thread Starter
Join Date: Dec 2019
Location: spain
Posts: 29
Received 4 Likes on 4 Posts
Default
[CITA = octavo; 19253552] [CITA = MARCOS BERMUDEZ JORGE; 19253106] ¡Gracias por el consejo! Lo haré.
wich números de CV y un par i pueden tener cita]

Por favor, siga los consejos bien aquí, comprometerse con un plan y seguir adelante
usted no puede montar una hoja de banco de pruebas [/ quote]

Yes I have the kit and the heads, but i were looking if this option of the pistons 22144-08B with the SE 585 its possible. I see dyno numbers very interesting.

thanks
 
Reply Like



Advanced Search
Quick Reply: Kit stage III (29893-07B) with cnc ported heads


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 06:36 AM.