What Year Jugs?
#1
#2
Join Date: May 2015
Location: Then Wisconsin, now North Carolina
Posts: 3,287
Received 976 Likes
on
675 Posts
ANY twin cam that was an 88 or 95, or 96 or 103" out of the factory.
If 95 or 103, they will need to go .005" or .010" over as 95 & 103 are same bore.
88 and 96 are same bore but they need to be enlarged to be a 95" or 103".
Soooo - your 2007 96" cylinders will work.
If 95 or 103, they will need to go .005" or .010" over as 95 & 103 are same bore.
88 and 96 are same bore but they need to be enlarged to be a 95" or 103".
Soooo - your 2007 96" cylinders will work.
Last edited by Ed Ramberger; 03-10-2018 at 09:39 PM.
#3
Thread
Thread Starter
Forum
Replies
Last Post