Best oil filter wrench
#1
Best oil filter wrench
So this morning I bought a cheap oil filter wrench (fram cup type) at wally world, took it home and with a cutoff wheel took a section off to clear the sensor up front. What a POS !!! didn't even think about working. All it did was slip. So what's the best one out there that actually works?
#2
I tried a few then finally ponied up for the Harley one.
Then I relocated the filter altogether by my saddle bag. You can see it in the signature picture. Nearly blew my motor when one of the relocated oil lines blew a hose due to me routing it rubbing underneath. Lol....
Anyway the HD one worked fine.
Then I relocated the filter altogether by my saddle bag. You can see it in the signature picture. Nearly blew my motor when one of the relocated oil lines blew a hose due to me routing it rubbing underneath. Lol....
Anyway the HD one worked fine.
#4
#5
#6
Had a hell of a time getting the filter to budge on my last oil change. I found the old-school method of using an old screw driver and hammer to be quite effective! Sharpen up the tip of the screw driver on the grinder so it will puntcure the filter easily. At the top of filter, drive the screwdriver through the filter and out the other side. Be careful not to ding the motor. Got just enough leverage to break the seal.. Messy, but effective... May help to remove the voltage regulator for more room...
#7
Trending Topics
#8
Had a hell of a time getting the filter to budge on my last oil change. I found the old-school method of using an old screw driver and hammer to be quite effective! Sharpen up the tip of the screw driver on the grinder so it will puntcure the filter easily. At the top of filter, drive the screwdriver through the filter and out the other side. Be careful not to ding the motor. Got just enough leverage to break the seal.. Messy, but effective... May help to remove the voltage regulator for more room...
#9
#10