Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.

TBW wiring?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-20-2009 | 07:16 PM
kens03's Avatar
kens03
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 104
Likes: 0
From: Vicksburg, MS
Default TBW wiring?

I replaced my handlebars on my 2009 FLHTCU. I noted the wire connector colors and where they went but missed indexing the connector. Does anyone have the connector info.?
I am going to buy the Service Manual but want to get my bike going as soon as possible.
Any help will be appreciated.
Thanks,
Ken
 
  #2  
Old 07-20-2009 | 07:36 PM
dawg's Avatar
dawg
Seasoned HDF Member
Joined: Jun 2006
Posts: 26,764
Likes: 3,270
From: Vermont
Default

Wires from black sleeve go in 1, 2, 3

1-black
2-white
3-red

Wires from yellow sleeve go in 4, 5, 6

4-black
5-white
6-red
 
Attached Thumbnails TBW wiring?-untitled.jpg  
  #3  
Old 07-20-2009 | 09:55 PM
kens03's Avatar
kens03
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 104
Likes: 0
From: Vicksburg, MS
Default Connectors

Thanks Dawg,
My wire colors are different. The wires coming out of the handlebars are (Male pin): Brown, Blue, Black, Red, Violet and Gray
The wires that go into the main harness are (Female socket): Red with White Stripe, Brown with Yellow stripe, Black with Gray stripe, Brown with Orange stripe, Blue with Green stripe and Black with White stripe.
Do you have anything that will match this?
Thanks again,
Ken
 
  #4  
Old 07-20-2009 | 10:49 PM
Bertk's Avatar
Bertk
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,788
Likes: 203
From: SW Florida
Default

Originally Posted by kens03
Thanks Dawg,
My wire colors are different. The wires coming out of the handlebars are (Male pin): Brown, Blue, Black, Red, Violet and Gray
The wires that go into the main harness are (Female socket): Red with White Stripe, Brown with Yellow stripe, Black with Gray stripe, Brown with Orange stripe, Blue with Green stripe and Black with White stripe.
Do you have anything that will match this?
Thanks again,
Ken
Which "Socket" are you referring to, the right or left switch controls, or?
 
  #5  
Old 07-21-2009 | 07:44 AM
dawg's Avatar
dawg
Seasoned HDF Member
Joined: Jun 2006
Posts: 26,764
Likes: 3,270
From: Vermont
Default

Originally Posted by kens03
Thanks Dawg,
My wire colors are different. The wires coming out of the handlebars are (Male pin): Brown, Blue, Black, Red, Violet and Gray
The wires that go into the main harness are (Female socket): Red with White Stripe, Brown with Yellow stripe, Black with Gray stripe, Brown with Orange stripe, Blue with Green stripe and Black with White stripe.
Do you have anything that will match this?
Thanks again,
Ken
The other that I have is

Blue goes to the white wire from the black sleeve
Black goes to the black wire from the white sleeve
Brown goes to the red wire from the black sleeve
Red goes to the red wire from the yellow sleeve
Purple goes to the white wire from the yellow sleeve
Grey goes to the black wire from the yellow sleeve

This was for the 32310-08 sensor without the green clip

Hope this helps.
 
  #6  
Old 07-21-2009 | 07:46 AM
dawg's Avatar
dawg
Seasoned HDF Member
Joined: Jun 2006
Posts: 26,764
Likes: 3,270
From: Vermont
Default

Originally Posted by Bertk
Which "Socket" are you referring to, the right or left switch controls, or?
He's referring to the throttle sensor wiring.
 
  #7  
Old 07-21-2009 | 04:38 PM
kens03's Avatar
kens03
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 104
Likes: 0
From: Vicksburg, MS
Default I screwed up!!!!!!!!!!!

It is the throttle by wire connector. Sorry for the confusion I caused.
Thanks again,
Ken
 
  #8  
Old 07-21-2009 | 06:53 PM
dawg's Avatar
dawg
Seasoned HDF Member
Joined: Jun 2006
Posts: 26,764
Likes: 3,270
From: Vermont
Default

How'd you make out? Any progress?
 
  #9  
Old 07-22-2009 | 09:55 AM
Bertk's Avatar
Bertk
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,788
Likes: 203
From: SW Florida
Default

Originally Posted by dawg
He's referring to the throttle sensor wiring.
OK, got it.
 
  #10  
Old 07-25-2009 | 12:24 PM
kens03's Avatar
kens03
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 104
Likes: 0
From: Vicksburg, MS
Default

I got the service manual off the internet and got it all together. I want to thank y'all for your replies and concern. This is still a GREAT place to find help.
Take care Guy's.
Ken
 


Quick Reply: TBW wiring?



All times are GMT -5. The time now is 02:17 AM.