Selling the mag wheels and 3.15:1 gearing setup off my '06 Dyna. Wheels are in good shape, not bent, no dings, no major scratches, no corrosion or pitting. Have some minor stains that could be polished out. The wheels have 1" wheel bearings in them in good condition, which fit '06 and '07 dynas, BUT, if you're buying the wheels and want them for an '08-up bike I'll install the 25mm bearings for free if you pay for the bearings. I'm qualified and have the proper tooling. Front has a 110/90-19 (one size wider than stock) Bridgestone that's almost new, around 1k miles, works great. Front rotor is in good shape, not warped, at 4.77mm, min spec is 4.5mm. Rear has a black Harley floating rotor on it in great shape. Less than 10k miles, measures .226", min spec is .205, not warped, tons of life left. On the other side is an '06 70 tooth rear sprocket which many people upgrade to on the '07 up bikes. It's almost new, maybe 1k miles. I also have an Andrews 30 tooth transmission sprocket that I've lightened. It's drilled and the backside machined down, it's about 2lbs lighter than a stock pulley. Less than 10k miles on this pulley, great condition. I also have an '07-up belt that I installed at the same time as trans pulley, great shape, less than 10k miles.
I'm selling because I put Buell wheels and chain drive on the bike.
I'm willing to split up anything other than the two wheels themselves.

Here's a general list of prices:
Wheels only with just front rotor and tire-SOLD
Rear 70t sprocket-SOLD
Front 30t sprocket- $125 shipped, this will fit any 6 speed bike!
Rear black floating rotor- SOLD
Belt- $100 shipped
I forgot about the belt when taking pics. I can get pics and the part number if needed.
Thanks, feel free to pm with questions.

 

Thanks for getting back to me about wheels. Thats a little more than I was wanting to spend. I was looking to be in a set of used for around $400 I know this is a good bit less than what your asking, but I would still need to powdercoat. I called a dealer a fewweeks ago and the factory powdercoated are $400 each. I know your just now starting to try to sell them. If you think you could work with me let me know.Thanks

 

Sent you a pm

 

sent you a pm about the wheels.

 

Im interested in that front rotor if you still have it.

 

front 30t pulley shipped to 96740 ina flat rate box for $90, if it fits my '13 street bob. i can paypal anytime if your interested

Aloha

 

Wheels and 30t are pending, I'll let you know if anything changes.

 

Wheels with front tire and front rotor are sold. Everything else still available.

 

75$ shipped to 95382 for the 30t pully

 

Still have the two pulleys and possibly belt? PM me please. thanks