**SOLD** CVO Fat Bob Tach, Mount & wiring harness
#1
04-18-2010, 07:22 PM
**SOLD** CVO Fat Bob Tach, Mount & wiring harness
For Sale:
CVO Tach assembly this was taken from a 09 CVO Fat Bob I picked it up to use on my bike but have decided to stay with my console speedo/tach combo....
I had the tach cup coated wrinkle black as the chrome looked odd ontop of the black risers, I made a disconnect wiring harness from factory HD plugs so you could easly install the tach all you need to do is wire it into your harness then plugin the tach harness. I have labled the wires as to there location they need to be spliced into...
CVO Tach assembly this was taken from a 09 CVO Fat Bob I picked it up to use on my bike but have decided to stay with my console speedo/tach combo....
I had the tach cup coated wrinkle black as the chrome looked odd ontop of the black risers, I made a disconnect wiring harness from factory HD plugs so you could easly install the tach all you need to do is wire it into your harness then plugin the tach harness. I have labled the wires as to there location they need to be spliced into...
The CVO Fat Bob Tach wiring originaly pluged into the main wiring harness so I traced out the wiring in the manual and it would appear that you can splice the wiring in under the tank console most of which can be done rite at the speedo plugin harness..
Asking $225.00 OBO this includes shipping and insurance shipped USPS Priority Mail to the lower 48 Paypal or Postal Money order...
This will also fit on Street Bob's with the one piece risers......
HERE ARE THE PIN LOCATIONS FROM THE 09 MANUAL AND THE WIRE COLORS ON THE TACH HARNESS THEY MATCH THE WIRE COLORS ON THE FACTORY WIREING HARNESS SPEEDO PLUGIN:
ORANGE - PIN 1 IGNITIONLT GREEN/V - PIN 2 SERIAL DATA
BR/GY - PIN 5 or BATTERY
O/W - PIN 6 ACCESSORY
BK - PIN 7 or GROUND
Last edited by HSB; 04-27-2010 at 11:44 AM. Reason: SOLD
#3
04-21-2010, 10:07 AM
#4
04-21-2010, 10:17 AM
#7
04-23-2010, 08:00 PM
2nd Gear
Join Date: Nov 2009
Location: Cypress, Tx.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
04-24-2010, 11:59 AM
Yes it will bolt directly to your existing risers the bolt pattern is exactly the same....
There are several fourm members with Fat Bob's that already have this tach setup on the bikes useing the existing risers.....
If your intrested send me a PM and we can talk......
There are several fourm members with Fat Bob's that already have this tach setup on the bikes useing the existing risers.....
If your intrested send me a PM and we can talk......
#10
05-03-2010, 07:00 PM
Cruiser
Join Date: Jan 2010
Location: SOCAL
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Eric The Welder
Dyna Glide Models
6
01-07-2010 08:36 AM
