Misc pieces/parts & aftermarket lights
#1
Misc pieces/parts & aftermarket lights
As the title says, I have a bunch of misc stuff I'm trying to clear out. Most of it is general fitment, but the last few items are Wide Glide specific. That's pretty obvious though...
__________________________________________________ ______________
Radii LED tail light / directional combo $75
Measurements - 6.25w x 2.75h x 1.25d
Here is an ebay link to the light I bought. I used the light until I was notified by the state of VA the directionals are too close together. So I bought a single tail light and put the directionals back on the struts. These LED's are very bright - not the cheap/dim LED's also on the market. I'm just selling the light - not the bracket.
http://cgi.ebay.com/ebaymotors/RADII...Q5fAccessories
__________________________________________________ ______________
Cat-eye LED brake light $15
Measurements - 5w x 2.5h x 2d
This was my replacement tail light after I removed the radii tail light. Even though it's LED - the brake light isn't very bright. The running light is too bright and drowns out the brake light. Maybe someone knows the working nuts/bolts of LED's and can make this work better.
__________________________________________________ ______________
Wedge shaped directionals $20
Measurements - 2w x 1.25h x 3.5d 1.5" mounting bolt to mounting bolt
I thought about mounting these on the struts as directionals, but decided the wife needed the quick detachable sissy bar instead. So these are still in the package - never been mounted/installed.
__________________________________________________ ______________
Kuryakyn visor bezel for large 2.25" silver bullets $10
Measurements - 2.25 radius
Still in the package and I don't have a use for them. There isn't any glass with these.
__________________________________________________ _____________
Kuryakyn bezel for large 2.25" silver bullets w/ red glass $10
Measurements - 2.25 radius
The bezels don't have the built in visor and are still in the package. The red glass is out of the package and has small chips on the perimeter, but will be hidden once assembled. Again, I don't have a use for them.
__________________________________________________ _____________
Kuryakyn mounting kit for 06' - 07' Dyna with 39mm/49mm forks make offer
I used the 41mm kit and don't have a use for the 'other' kit. It's lacking 1 pinch bolt and includes everything in my photo.
Follow this link for description/pictures from Kuryakyn
http://www.kuryakyn.com/documents/in...-22HD-0408.pdf
__________________________________________________ ______________
Headlight mounting post/bolt. make offer
Will raise headlight up 1" and mounting bolt is 2.5" long
__________________________________________________ ______________
Chrome fork nut covers make offer
I used the stem cover, but with my 3" tank lift there wasn't enough clearance for these covers to work. It would have cleared just fine with a 2" tank lift, but I decided to keep the 3" lift and not use these. Still in the package except I started the set screws so they wouldn't get lost.
__________________________________________________ ______________
Non- HD luggage rack I had on my 05' Wide Glide. make offer
I used this luggage rack until this past winter when I changed out my tins, dropped the pillion seat, and made the sissy bar quick detachable. There is no chance I'm bolting this back on.
__________________________________________________ _______________
Tank/rear fender off 04'/05' Wide Glide. make offer
I bought these with plans of painting them a custom paint job. Never got around to it and found the HD set I have on the bike now. The tins are in pretty good shape, but should be sanded/painted. I don't have a front fender as I was heading for something custom. A front fender can be found for cheap on e-bay, but I never got one.
__________________________________________________ ______________
Let me know if you have any questions/ need more photos/ more information
I don't have a job where I'm near the computer to check posts until I get home in the evening.
__________________________________________________ ______________
Radii LED tail light / directional combo $75
Measurements - 6.25w x 2.75h x 1.25d
Here is an ebay link to the light I bought. I used the light until I was notified by the state of VA the directionals are too close together. So I bought a single tail light and put the directionals back on the struts. These LED's are very bright - not the cheap/dim LED's also on the market. I'm just selling the light - not the bracket.
http://cgi.ebay.com/ebaymotors/RADII...Q5fAccessories
__________________________________________________ ______________
Cat-eye LED brake light $15
Measurements - 5w x 2.5h x 2d
This was my replacement tail light after I removed the radii tail light. Even though it's LED - the brake light isn't very bright. The running light is too bright and drowns out the brake light. Maybe someone knows the working nuts/bolts of LED's and can make this work better.
__________________________________________________ ______________
Wedge shaped directionals $20
Measurements - 2w x 1.25h x 3.5d 1.5" mounting bolt to mounting bolt
I thought about mounting these on the struts as directionals, but decided the wife needed the quick detachable sissy bar instead. So these are still in the package - never been mounted/installed.
__________________________________________________ ______________
Kuryakyn visor bezel for large 2.25" silver bullets $10
Measurements - 2.25 radius
Still in the package and I don't have a use for them. There isn't any glass with these.
__________________________________________________ _____________
Kuryakyn bezel for large 2.25" silver bullets w/ red glass $10
Measurements - 2.25 radius
The bezels don't have the built in visor and are still in the package. The red glass is out of the package and has small chips on the perimeter, but will be hidden once assembled. Again, I don't have a use for them.
__________________________________________________ _____________
Kuryakyn mounting kit for 06' - 07' Dyna with 39mm/49mm forks make offer
I used the 41mm kit and don't have a use for the 'other' kit. It's lacking 1 pinch bolt and includes everything in my photo.
Follow this link for description/pictures from Kuryakyn
http://www.kuryakyn.com/documents/in...-22HD-0408.pdf
__________________________________________________ ______________
Headlight mounting post/bolt. make offer
Will raise headlight up 1" and mounting bolt is 2.5" long
__________________________________________________ ______________
Chrome fork nut covers make offer
I used the stem cover, but with my 3" tank lift there wasn't enough clearance for these covers to work. It would have cleared just fine with a 2" tank lift, but I decided to keep the 3" lift and not use these. Still in the package except I started the set screws so they wouldn't get lost.
__________________________________________________ ______________
Non- HD luggage rack I had on my 05' Wide Glide. make offer
I used this luggage rack until this past winter when I changed out my tins, dropped the pillion seat, and made the sissy bar quick detachable. There is no chance I'm bolting this back on.
__________________________________________________ _______________
Tank/rear fender off 04'/05' Wide Glide. make offer
I bought these with plans of painting them a custom paint job. Never got around to it and found the HD set I have on the bike now. The tins are in pretty good shape, but should be sanded/painted. I don't have a front fender as I was heading for something custom. A front fender can be found for cheap on e-bay, but I never got one.
__________________________________________________ ______________
Let me know if you have any questions/ need more photos/ more information
I don't have a job where I'm near the computer to check posts until I get home in the evening.
Last edited by Baeseman1; 06-14-2009 at 10:49 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Aaron LeBel
General Harley Davidson Chat
4
06-21-2019 10:41 AM