2014 Low Rider
#6521
Style over function I think. I also hate looking down so far. That's really my only gripe. Well, the ignition switch on the side of the engine is annoying too, because of the horn relo. I know some people have moved it but I'm not going to bother.
#6522
The turn signal indicators down low are annoying. My '06 had a little display on the bars for signals and high beam. Mine is getting a horn between the jugs. That little disc sucks pretty bad.
#6524
Same here. I will be keeping mine for a long time. I would also not buy a Softail (LR or otherwise).
#6525
This one is on my LRS:
https://www.shoputahharley.com/produ...UaAl0BEALw_wcB
#6526
#6527
You can install a standard horn in the exact same place as the pancake. Bolts right up and uses the same connectors.
This one is on my LRS:
https://www.shoputahharley.com/produ...UaAl0BEALw_wcB
This one is on my LRS:
https://www.shoputahharley.com/produ...UaAl0BEALw_wcB
#6530
You just use the horn itself and the nut. Toss the bracket and everything else in the box. It has a threaded post just like the pancake and fits on the same bracket. You can bend the bracket back towards the motor a little to recess the horn a bit more. I haven’t done that on mine yet. Just make sure the horn opening faces down or it’ll fill up with water when you wash or in the rain...