I have to give Two Brothers props. They make a damn nice HD exhaust.

 

I have watched thousands of HD exhaust videos on youtube over the last two years and have to say that the TB HD exhaust you have is one of the best.

 

It looks like the '17 LR will finally come in red. This might be tempting.

 

Go for it...

 

A red Low Rider will look killer!

 

Anyone know what size bushings the standard low rider risers use? I've been looking at different poly and solid bushings and based on part numbers, the 2014-2016 bushings seem to be a different size than street bobs, etc. Any thoughts?

 

Great looking bike! I'm a big fan of the powder coated springs, looks and longevity are always a plus. I see you have a detachable backrest setup. I've been trying to figure out how to do this exact same setup as I just got a detachable, but really don't want to relocated the turns. What brackets and hardware did you use to achieve this look?

 

You don't have to relocate them, there is a kit that puts the docking hardware at the base of the signal lights. I am not sure which kit is used for the Low Rider as mine had them relocated for the saddlebags I had. Here is the kit for the Wide Glide, not sure if it can be used on the Low Rider.

http://www.harley-davidson.com/app-c...ts/-J04974.PDF

Here is a pic of the kit installed on a Wide Glide from another thread. I am thinking you may need the rear signals off the Wide Glide to make it work. Once Iron Obsessed sees your question he should be able to tell you more than I can.

 

Looking forward to seeing the 2017 LR and LR S colors.

 

I used the equivalent to p/n 56157-85T on mine and they were fine on my LR. I got mine off of ebay for 14 bucks. they were good quality.