Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

2014 Low Rider

Thread Tools
 
Search this Thread
 
  #2491  
Old 10-01-2015, 03:53 PM
Super08's Avatar
Super08
Super08 is offline
Supporter
Join Date: Jun 2015
Location: Alberta
Posts: 1,046
Received 69 Likes on 59 Posts
Default

Originally Posted by 98acrsilver
yea it was only 2 of them on the right side like by the set screws that hold the hold the whole baffle unit in the pipe. then i was curious and just ran the bolts in without any disks by themselves to see and poof there it was. ill be damn. ill just use the 14 and open cap. didnt really wanna cut the screws down then if i ever wantd to put it back to stock then theyd be too short. ill take a pic then
Just go on Fastenal's website and order up what ever size you need. It would only cost about 5 bucks or something.
 
  #2492  
Old 10-01-2015, 07:24 PM
Ikelove's Avatar
Ikelove
Ikelove is offline
Seasoned HDF Member
Thread Starter
Join Date: May 2014
Location: Illinois
Posts: 14,646
Received 12,881 Likes on 4,002 Posts
Default

Will be getting the 5000 mile service next week. No issues to report so far. Riding bike to work every chance I get.
 
  #2493  
Old 10-01-2015, 07:26 PM
Super08's Avatar
Super08
Super08 is offline
Supporter
Join Date: Jun 2015
Location: Alberta
Posts: 1,046
Received 69 Likes on 59 Posts
Default

I will be doing my own tomorrow or the day after depending on how much time I get. I want to install the new front engine mount at the same time.
 
  #2494  
Old 10-01-2015, 09:39 PM
Scrambler900's Avatar
Scrambler900
Scrambler900 is offline
Road Captain
Join Date: May 2013
Location: Brooklyn
Posts: 525
Received 8 Likes on 8 Posts
Default

Originally Posted by reedyjm
You want to read a review of a bike you already own?
No idea. This thread has do run its course, it needs to be put out to pasture. I really could care less that someone is going to get the 5k service done soon.
 
  #2495  
Old 10-01-2015, 11:04 PM
Ikelove's Avatar
Ikelove
Ikelove is offline
Seasoned HDF Member
Thread Starter
Join Date: May 2014
Location: Illinois
Posts: 14,646
Received 12,881 Likes on 4,002 Posts
Default

Originally Posted by Scrambler900
No idea. This thread has do run its course, it needs to be put out to pasture. I really could care less that someone is going to get the 5k service done soon.
Well, apparently you do care because you took the time to post the dumbest post in this entire thread. Why even waste your time on a thread that "has do run its course"? This thread has gone almost 2500 posts over 250 pages and has had 330,000 views.

This thread is a place anyone looking to get a current gen LR can get a lot of great information, see what others have done to their LRs, and read about what issues actual LR owners have encountered. Everything from mods to how long the factory tires last.

My post noting 5000 trouble free miles does not merit the kind of response you posted. If you really cared less, you would not have posted anything.
Go find someplace else to grace with your presence.
 
  #2496  
Old 10-02-2015, 10:49 AM
emperor wurm's Avatar
emperor wurm
emperor wurm is offline
Road Warrior
Join Date: Apr 2010
Location: Corona, Ca
Posts: 1,805
Received 95 Likes on 67 Posts
Default

Anyone go to 14" apes? Im want to run 14" apes, and I am about to pull the trigger on some throttle cables that are +6 in....is that too long?
 
  #2497  
Old 10-02-2015, 01:33 PM
SBRob's Avatar
SBRob
SBRob is offline
Seasoned HDF Member
Join Date: Oct 2008
Location: Missouri City,TX
Posts: 7,356
Received 4,296 Likes on 1,703 Posts
Default

My LR is still in the shop...the rear cast wheel has an air leak so it's being replaced under warranty. It might take until next week for the new wheel to come in, but at this point I really don't care cuz I bought a new 2015 Honda 500X and I'm having a blast riding it.

I figure ain't nuthin' wrong with owning more than one bike.
 
  #2498  
Old 10-02-2015, 11:34 PM
A1A's Avatar
A1A
A1A is offline
Tourer
Join Date: Aug 2013
Location: Jax Beach, Florida
Posts: 304
Received 57 Likes on 49 Posts
Default

Originally Posted by SBRob
My LR is still in the shop...the rear cast wheel has an air leak so it's being replaced under warranty. It might take until next week for the new wheel to come in, but at this point I really don't care cuz I bought a new 2015 Honda 500X and I'm having a blast riding it.

I figure ain't nuthin' wrong with owning more than one bike.
To bad they couldn't put a dab of Devcon or JB Weld on the pin hole inside the rim. That would get you back on the road. While you wait for the new rim to arrives.
 
  #2499  
Old 10-03-2015, 07:57 AM
SBRob's Avatar
SBRob
SBRob is offline
Seasoned HDF Member
Join Date: Oct 2008
Location: Missouri City,TX
Posts: 7,356
Received 4,296 Likes on 1,703 Posts
Default

Originally Posted by A1A
To bad they couldn't put a dab of Devcon or JB Weld on the pin hole inside the rim. That would get you back on the road. While you wait for the new rim to arrives.
Yea, it's a bit frustrating, but at least it's being covered under warranty. It's gonna be about two weeks for the bike to be ready to ride....sucks.

Oh well, I'm having so much fun riding my new 2015 Honda 500X I really don't care when I get the LR back...
 
  #2500  
Old 10-03-2015, 09:57 PM
98acrsilver's Avatar
98acrsilver
98acrsilver is offline
Cruiser
Join Date: Sep 2012
Location: Lewisburg,Pa
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Default




open endcap + 14 stock disk, think that big red tail light is goin next in favor of the laydown smoked





up at the state park in central pa for sunset
 


Quick Reply: 2014 Low Rider



All times are GMT -5. The time now is 02:36 AM.