Finally getting around to installing this thing only to find out it didn't come with a set of instructions. Can someone post up a pic or PDF of their installation instruction sheet? Thanks

 

Mine didn't come with instructions either. Doesn't really matter because they are very vague. The front is pretty straight forward. The rear is a bitch. Support oil pan with a jack, take the top bolts out of the isolator one at a time, putting the new bolts in as soon as the stock ones come out. Gonna need to move the jack up and down some to get them lined up. Need to move the main harness out of the way to get the top bracket on there, also need to rotate the banjo fitting out of the way til everything is in. Careful not to mess up the threads on those top bolts when you push them through, and thread them into the top bracket. The bolts on the backside are pretty simple to get in, may still need to move the motor up and down. Good luck patience is the key

 

Here's my struggle lol there's a pic of the instructions in there

https://www.hdforums.com/forum/dyna-...html?styleid=8