FLD Rear Fender on Street Bob
#1
#2
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Hey Doom I am about to do this to my bike this weekend or next weekend to my streetbob. Everything is a bolt on but you have to use 1/8 spacers on the sides because the FLD fender is just a little bit narrower then the FXBI. but everything should hook right up might have to extend the tail light wires and blinkers wires I will post pics after. Jackyl
#3
#4
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
I'm considering the same. Have you decided what to do about the front fender? I already have a quick release windshield so I don't want to change the tree's. Can't seem to find a FLH style front fender narrow enough for the mid glide.
#7
Trending Topics
#8
#9
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
The one on ebay probably go for around 200 then 100 for the painter. This morning I ordered a vivid black rear FLD fender new from Surdyke for 400 and some change. I'm still searching for an FL style mid glide front fender. Anybody have any suggestions? RWD may be the route I'll have to take, but I'd like a fender with the FL shape without the soft tail flip. I've got a buddy that will split and remove a bit from the center and re-weld a Harley FL fender, but seems like a lot of work----
Last edited by fskitch; 04-16-2014 at 12:01 PM.
#10
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
the red fender on ebay sold for 260... so maybe 100 for paint, thats what I was quoted in my neighborhood. I'm just about 50 over for a factory vivid black one shipped from surdyke Harley. I got the turn signal bar and tail light from the very red one mentioned on ebay..193 for both. Maybe a little high, but I'm good with it..found a front fender possibility. Sumax loboy pn 8631 composite. Anyone have experience with those fenders? Looks like it'll flow with the FLD rear.