Taking off the badges today and was wondering if one is better than the other? Plan on using glide floss to remove the badges then either goo gone or goof off.
Thanks for your time.

 

Neither. I "rolled" the glue off with my thumb.

 

Goo gone worked well for me. Need to let it soak for awhile.

 

tumb.............................................. .................................................. ..................

 

I used a combo of Goo Gone, WD-40, and brake cleaner. I was worried a little about the brake cleaner on my clear coat, but it seemed to work ok. Try taking a pi$$ on it. That's about the only thing I haven't heard.

One thing I would try just because I like to experiment is a can of cpu/keyboard air. The stuff they sell at office supply stores. In case you didn't know when you hold the can upside down and spray it comes cold enough to cause instant frostbite to your skin. I'd be interested to know if this would freeze-dry the glue and take away it's sticky properties.

 

Same here. Goof off works better than Goo gone IMO. But I used my thumb too as I didn't know what any chemicals were going to do to the paint.

 

I think I will pee on mine and see how that works. I'll let you know.

 

I am a fan of goo gone...Let it soak...

 

anubisss is right. Use Goo Gone, let it soak for a few minutes, then repeatuntil clean.
Works for me.

[IMG]local://upfiles/17815/68D669D527C14211B61E749A1751356E.jpg[/IMG]

 

the stuff[glue] from the reflectors....i used goof-off...swear by it...great stuff,however,
the glue on the tank emblems just took a lil heat and a thumb.