??? on installing forwards on 06 Superglide
#11
RE: ??? on installing forwards on 06 Superglide
There's no way mine would come out with out removeing the inner primmary cover, the shaft that has to come out is 5 1/2" long. There's not enough room to pull it out the back, with out pulling the primary outward to gain enough room between the primary and lower Case. I had to use a brass freez plug to seal theshaft hole on the Inner Cover so oil wouldnt leak out the back side. Trotter
[IMG]local://upfiles/24219/18B53AD0E4C14DCFA91EE258A5D28C2D.jpg[/IMG]
[IMG]local://upfiles/24219/18B53AD0E4C14DCFA91EE258A5D28C2D.jpg[/IMG]
#13
RE: ??? on installing forwards on 06 Superglide
It can be done without removing the inner primary, but if your going to the dealer in a few weeks anyway, I'd probably just wait. Here's a link to some pics. of my set up.
https://www.hdforums.com/m_576946/tm.htm
https://www.hdforums.com/m_576946/tm.htm
#14
Thread
Thread Starter
Forum
Replies
Last Post
QC-RAIDERS-91
Dyna Glide Models
20
03-01-2013 06:14 AM