turn signal mirrors
#21
01-16-2013, 07:56 PM
#22
01-16-2013, 07:57 PM
I have Heartland. Forget how much they were. Excellent quality stuff. I like these also if you wanna go another route
http://www.chromeglow.com/catalog.as...showprevnext=1
http://www.chromeglow.com/catalog.as...showprevnext=1
Those heartland mirrors are sick! They would be my choice.
#23
01-16-2013, 09:01 PM
Cruiser
Join Date: Nov 2012
Location: Seattle, WA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I got mine on today. They work fine, but the signal LED in the dash flashes rapidly. I went to the dealer to talk to one of the techs about it. We rang up HD's tech support and eventually talked to the chief electrician. Ultimately, I need to install a 3 or 4 ohm resistor (3.8 would be optimum) on the turn signal power wire.
The rapid flashing won't hurt anything, but that's supposed to be the warning for a burned out bulb. I have LED at all 4 corners, so I doubt they'll burn out before I can add the resistor.
The rapid flashing won't hurt anything, but that's supposed to be the warning for a burned out bulb. I have LED at all 4 corners, so I doubt they'll burn out before I can add the resistor.
damnit, and i thought i crossed those mirrors off the list for this winter's spending spree... now they're back on the list.
#24
01-16-2013, 09:07 PM
#26
01-16-2013, 11:34 PM
I have the RIVCOs and love them. Quality is really good.
I am not having the quick-flash issue on my dash like some others are with LED lights, but that could be because I kept my stock signals. I just moved them to the forks.
I am not having the quick-flash issue on my dash like some others are with LED lights, but that could be because I kept my stock signals. I just moved them to the forks.
#28
01-17-2013, 06:31 AM
Squid. Just be prepared if you change your stock front bulbs with LED or if you try to remove them. The system needs to feel resistance in each front signal to prevent fast flash. Previous models could get away with the standard load equalizers, but they didn't work on my bike (two different versions.$
#29
01-17-2013, 08:02 AM
Tourer
Join Date: May 2011
Location: La Belle Province QC Canada
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Really like the look of those one look good on your bike too.
Was the install easy? I really like the look of those onebut I'm not the best when it comes down to wiring so just wondering if I getthem if it's something I could just plug in or need to slice some wires ?
#30
01-17-2013, 01:49 PM
Outstanding HDF Member
Join Date: Aug 2012
Location: Tampa
Posts: 2,130
Likes: 0
Received 0 Likes
on
0 Posts