Bump... I am trying to figure out what size spacers were used also. Just picked up some 13 spoke mags

 

i am going to do this on my 2007 fxdb... i am picking up some 13 spoked sportster mags tomorrow i got..

anyone got a part number for the old style rotor?

 

What do you call an "old style rotor"? and if mean 2000-2005 Dyna's 11.5"...why?

 

I read somewhere that my 07 dyna rotor wount fit a 2006 sportster mag rim...

dont know where now lol.. i might be wrong!


ohh and bobber.. what was these rims from originaly? i am picking some 13 spoked sportster mags up from an 06 sportster and want them on my fxdb 07..

 

No, all the 2000-later hub mounted rotors fit fine, but you'll want your '07 11.8" (300mm) rotors.

If those 13-spoke wheel set is truly from a 2006 sportster, you'll have to bore the front wheel for your 25mm axle/center spacer. The rear wheel is already for 1" bearings so it will work fine as is.

You'll need a bearing shim to use your 25mm ID x 15mm wide bearings in those wheels designed for 21mm wide bearings. New Center spacer sleeve and some custom wheel spacers. You'll also need rotor(s) spacers or caliper spacers to move them inward for that narrower wheel

 

Ok thanks. Great info.

Cheers man.

These are the rims.

 

I hope those are just bad photos, because it looks like tapered wheel bearings (1999-earlier) not sealed ball bearings. you have any other photos or a link

 

this is the original pictures from facebook. they might be better

 

The rear looks to be a tapered brg wheel (99-earlier). Sealed Bearing on Right.

 

Hmm i dont know how the tapered looks...

I have no idea what either looks.. to me it looks like the same rim with a busted bearing cap..


I told him to send some more pictures of the bearing.


Is the older rim not usable? i am going to machine the rim for other berings no matter what